816200
34
Zoom out
Zoom in
Previous page
1/44
Next page
EN / 34
You need internet connection on
your smart device to proceed with
HomeWhiz setup. Otherwise, the
HomeWhiz application will not let
you finish the setup procedure suc-
cessfully. Please contact your inter-
net service provider if you are hav-
ing problems with your internet con-
nection
HomeWhiz Application may require
you to type the product number
shown on the product label. You
can find the product label inside of
the appliance door. The product
number is located on this label.
6.15.2 Setting up a Washing Ma-
chine Connected to
Someone Else's Account
If the washing machine that you want to
use has been previously registered to the
system with someone else's account, you
need to establish a new connection
between your HomeWhiz App and the ap-
pliance.
a. Download HomeWhiz Application on the
new smart device you want to use.
b. Create a new account and log in to this
account on the HomeWhiz app.
c. Follow the steps described in Home-
Whiz Setup (HomeWhiz Setup) and pro-
ceed with the setup procedure.
Since the HomeWhiz Feature and
Remote Control function on your
appliance is operated via pairing
using Bluetooth technology only
one Homewhiz application can op-
erate it at a time.
6.15.3 Remote Control Function
and Using It
Bluetooth is automatically turned on after
setting up HomeWhiz. To activate or deac-
tivate the Bluetooth connection, please see
Bluetooth 3’’’.
If you turn off and on your machine while
bluetooth is active, it will automatically re-
connect. In cases such as paired device
going off the range, bluetooth will automat-
ically turn off. For this reason, you will need
to turn on the bluetooth again if you want to
use the Remote Control function.
You can check the bluetooth symbol on the
display to track your connection status. If
the symbol is continuously on, you have
bluetooth connection. If the symbol is flash-
ing, the product is trying to connect. If the
symbol is off, it means you are not connec-
ted.
If the Bluetooth connection is
turned on in your product, then the
Remote Control function can be se-
lected.
If the Remote Control function can-
not be selected, check the connec-
tion status. If the connection cannot
be established, repeat the initial
setup settings on the appliance.
NOTICE: For safety reasons, the
product’s door will remain locked
while the Remote Control function
is enabled, independently of the op-
erating mode. If you want to open
the door of the product, you will
need to turn the programme selec-
tion knob or press the remote con-
trol key to deactivate the remote
control function.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO B5WT5941082W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO B5WT5941082W in the language / languages: English as an attachment in your email.

The manual is 1.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO B5WT5941082W

BEKO B5WT5941082W User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info