761474

BEKO ATP 6100 I Manual

11
Zoom out
Zoom in
Previous page
1/120
Next page
10 / EN
Air purifier/ Instruction Manual
5
Operating Instructions
5.1 İmportant notes
•Carefully unpack your air purifier.
•Select a firm level place where there are no
obstructions to the air inlet grill or air outlet.
•Remove all PE bags from filters before use.
•Do not point air outlet towards wall.
Power button
Touch the Power button, the machine will
start running under the default “AUTO” set-
ting, and the indicator of “AUTO” setting will
illuminate.
Fan speed button
There are 4 speed settings including Low,
Medium, High and AUTO for selection. Touch
the Fan speed button to select your desired
speed setting.
Timer button
The timer allows you to run your air purifier
at your convenience, for up to 8 hours. With 3
settings including 2hr, 4hr and 8hr.
Dust sensor
This Air Purifier has a built-in smart dust sen-
sor which can detect the air quality of current
environment automatically, and the air qual-
ity can be shown by the air quality indicator
which can illuminate in blue, pink and red
when the air quality is very good, good and
bad accordingly.
6
Controls Introduction
Ionizer rocker switch
This appliance has an independent Ionizer
rocker switch equipped at the bottom of body,
feature which, when turned on, releases neg-
ative ions into outgoing filtered air to help the
air purification process.
Fg.4
Ionizer rocker
switch
Air purifier/ Instruction Manual 11 / EN
7
To Operate Your Ar Purfer
1. Connect the appliance with power source,
one “Bi” can be heard.
2. Touch the Power button once, “Bi-Bi” can
be heard, the appliance starts to run under
under the default “AUTO” setting, its corre-
sponding indicator will illuminate, and the air
quality indicator will illuminate in blue, pink or
red according to the actual air quality.
- Very good air quality: The air quality indi-
cator illuminates in blue.
- Good air quality: The air quality indicator
illuminates in pink.
- Bad air quality: The air purifier illuminates
in red.
3. And you can select your required speed set-
ting by following the operation described in
“CONTROLS INTRODUCTION”. After select,
the corresponding indicator of selected speed
setting will turn on.
4. After turn on the air purifier and select your
required speed setting, you can activate the
timer by following the operation as below:
Touch down Timer button on the control
panel, one beep “Bi” can be heard. There are
3 settings including 2H, 4H and 8H for selec-
tion. After select your required timing, the
indicator of selected timing will illuminate.
When the timer expires, the air purifier will
power off automatically and the indicator of
selected timing will extinguish.
5. When the filter change indicator illumi-
nates in white, it is time to change the HEPA
filter. Please change the HEPA filter by follow-
ing the operation described in the section of
“CHANGE THE HEPA FILTER”.
C
NOTE: Hold and Touch the “Power
button” for 2 seconds f you want
to enter nto the sleep mode. To re-
cover, hold and Touch the “Power
button” for 2 seconds agan.
Timer
Button
Air
Outlet
Fan Speed
Button
Power
Button
Filter change
indicator
Fg.5
Ar purfer/ Instructon Manual 11 / 120 EN
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO ATP 6100 I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO ATP 6100 I in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 21,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info