582434
5
Zoom out
Zoom in
Previous page
1/29
Next page
4 / 27 EN
Refrigerator / User Manual
Important instructions for safety and environment
We recommend that this appliance be connected
to the mains supply via a suitable switched and
fused socket. The appliance must be positioned so
that the plug is accessible.
Should the mains lead of the appliance become
damaged or should it need Replacing at any time,
it must be replaced by a special purpose made
mains lead which can only be obtained from a
BEKO authorised service agent.
Warning! This appliance must be
earthed
If the fitted moulded plug is not suitable for your
socket, then the plug should be cut off and an
appropriate plug fitted. Destroy the old plug which
is cut off as a plug with bared cord could cause a
shock hazard if inserted into a socket elsewhere in
the house.
The moulded plug on this appliance incorporates
a 13 A fuse. Should the fuse need to be replaced
an ASTABEAB approved BS 1362 fuse of the same
rating must be used. Do not forget to refit the fuse
cover. In the event of losing the fuse cover the plug
must not be used until a replacement fuse cover
has been fitted.
Colour of the replacement fuse cover must be the
same colour as that visible on the pin face of the
plug. Fuse covers are available from any good
electrical store.
Important! Fitting A Different Plug
As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in your
plug proceed as follows: (See diagram).
1. Connect the green-yellow or green (Earth) wire
to the terminal in the plug marked ‘E’ or with
the symbol or coloured green and yellow or
green.
2. Connect the blue (Neutral) wire to the terminal in
the plug marked ‘N’ or coloured black.
3. Connect the brown (Live) wire to the terminal in
the plug marked ‘L’ or coloured red.
With alternative plugs a 13 A fuse must be fitted
either in the plug or adaptor or in the main fuse
box. If in doubt contact a qualified electrician.
FITTED WITH
BS 1362 13A FUSE ALWAYS
FIT BS 1362 REPLACEMENT
CARTRIDGE FUSE
GREEN &
YELLOW
OR
GREEN
N
BLUE
OR
BLACK
L
BROWN
OR
RED
22mm.
6mm.
6mm.
6mm.
32mm.
12mm.
FUSE
CORD GRIP
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO ASD241X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO ASD241X in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info