475979

BEKO 40 LMLCDC33 Manual

50
Zoom out
Zoom in
Previous page
1/60
Next page
SETUP
EXIT
MENU
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
BG
C - -
0
P 01
SELECT
Fine Tuning
If the current channel requires Fine
Tuning, then select the fine tuning tab
by using the downward movement button
(
) in the Channel Settings menu.
Using the right-left movement (
)/( )
buttons on your remote control, adjust
the broadcast displayed on the screen
to your desired quality. Under normal
circumstances, you will not feel the need
to use the Fine Tuning function. The
AFC values of your television will
automatically adjust and lock themselves
to the channel. However, you might
need it in case the television transmitters do not
operate according to the standards. To store in
the memory the settings you have made, select
the Store option and press the right button (
).
SETUP
EXIT
MENU
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
BG
C - -
0
P 01
SELECT
If you do not know the channel
number
Press the MENU button. Move onto the
channel settings menu by pressing the
down movement button. Select the
program in which you would like to
perform an Installation using the right-
left movement (
)/( ) or numerical
buttons. Select the system in which you
would like to make the search from
among the system tabs. Enter the
System tab by pressing the direction
button (
) below. Here, your television
can be set to a single system and you
can also select from among more than
one systems via the (
)/( ) buttons.
(option) Move from here to the channel
tab via the downward movement button
(
). Pressing the ( ) keys on your
remote control, select 'S' for cable channels and
'C' for broadcast received from the antenna;
select the search tab with the downward
movement button (
) and scan the channels
in ascending order with the Right direction button
(
) and in descending order with the left direction
(
) button. If the channel that is found is of your
desired quality, select the storing tab. Then store
it in the memory pressing the button (
).
Repeat the same procedure also for the other
channels by selecting the program number of
your choice from among the program no. tab.
If there is need to perform Manual Fine Tuning
on the current channel or to name the current
channel, refer to the related parts.
Program Table
Press the
( )
button. Move onto the
Program Menu by pressing the downward
movement button. When you press the
button
( ), the program table will appear
on the screen.
Switching the locations of the program
channels that have already been
stored:
Select the program you would like to
relocate by pressing the upwards-
downwards
( )/( ) or Right-left direction
buttons
( )/( ). Press the “GREEN”
colored button. The cursor on the selected
program will blink.
the other program to which you would like
to relocate it with the Upwards-downwards
( )/( ) or Right-left direction buttons
( )/( ). Finish the relocation process by
pressing the “GREEN” colored button. The
channel in the first program number you
selected has been moved to your second
selected program number and the
channels between both program numbers
have been shifted to the initially selected
program number.
-11-
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO 40 LMLCDC33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO 40 LMLCDC33 in the language / languages: Dutch as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info