612676
24
Zoom out
Zoom in
Previous page
1/64
Next page
Operating the sewing unit
22
Operating manual 743-221-01 version 01.0 - 09/2013
Adjustment instruction:
The thread regulator's (2) is correctly adjusted if:
The thread take-up spring (1) is pulled down about 1 mm from its upper
final position, when the thread loop (6) passes the maximum hook
breadth.
The length of 1 mm is an approximative guide value. Depending on the
tension of the thread take-up spring it may be higher or lower.
5.6 Winding on the hook thread
Fig. 8: Winding on the hook thread
1. For a trouble-free functioning of the residual thread monitor always
remove any thread waste from the bobbin hub before winding.
2. Thread the hook thread according to the picture.
3. Prewind the hook thread in clockwise direction into the reserve groove
of the bobbin hub.
4. Fit the bobbin on the winder shaft (2).
5. Pull the thread end through the trimming clamp (3) and cut it off.
Caution: Danger of injury!
Turn off the main switch.
Thread the hook thread for winding only with the
sewing unit switched off.
ATTENTION!
(1) - Bobbin thread tension
(2) - Winder shaft
(3) - Trimming clamp
(4) - Winder clip
཰ཱི
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beisler 743-221-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beisler 743-221-01 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beisler 743-221-01

Beisler 743-221-01 User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info