634034
94
Zoom out
Zoom in
Previous page
1/103
Next page
Short Seam Automat 2211-5 Working Instructions
- D 94 -
Beisler Automated Sewing Equipment
D.3
Programming
Switching the rest thread monitor on or off:
Depending on the specifications of the sewing head, the
machine is equipped with a rest thread monitor (for lock
stitch upper part). Monitor can be switched on or off for
testing purposes. To switch a monitor on or offf:
9
Press key
NOTE - Operation without thread monitor!
During normal production, the rest thread monitor or
the top thread monitor should always be switched on
as otherwise the sewing programm will not be stop-
ped if the thread breaks
Switching clamp position behind end of seam on
or off:
If this function is enabled, the closed clamp moves to the
clamp transport end point behind the end of the seam be-
fore releasing the sewing piece. To enable or disable this
function:
6
Press key.


Moving clamp to waiting position:
If this function is enabled, the clamp moves to the waiting
position (e. g. special parameter 05: 48 cm).
V
Press key.
Scissors pick-up plate (left side pocket, right slash
selvage for ladies' trousers):
Enable scissors:
T
Press key.
D.3.12 Level 5 special parameters / Functions
Level 5 submenus
%QR96VT

F1 Back to level 4
F3 Switch top thread monitor on or off
F4 Switch bottom thread monitor for chain stitch upper
part on or off
F5 Switch rest thread monitor for lock stitch upper part
on or off
F6 Clamp position after end of seam
F7 Clamp waiting position
F8 Scissors pick-up plate left side pocket
Switching the top thread monitor on or off:
For testing purposes, the top thread monitor can be swit-
ched off. To switch the top thread monitor on or off:
Q
Press key.
NOTE - Operation without top thread monitor!
During normal production, the top thread monitor should
always be switched on as otherwise the sewing programm
will not be stopped if the thread breaks.
Switching the bottom thread monitor on or off:
Depending on the specifications of the sewing head, the
machine is equipped with a bottom thread monitor (for
chain stitch upper part). Monitor can be switched on or off
for testing purposes. To switch a monitor on or off:
R
Press key
NOTE - Operation without thread monitor!
During normal production, the rest thread monitor or
the top thread monitor should always be switched on
as otherwise the sewing programm will not be stop-
ped if the thread breaks.
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beisler 2211-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beisler 2211-5 in the language / languages: English as an attachment in your email.

The manual is 8,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beisler 2211-5

Beisler 2211-5 User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info