634034

Beisler 2211-5 Manual

81
Zoom out
Zoom in
Previous page
1/103
Next page
- D 81 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
Drive assistance transport to service position
To get sufficient space for works on the sewing head, the
assistance transport can be driven to the outer service
position.
• Press key.
Z
Return to start position:
• Press key.
Z
Manual actuation of the thread clamp:
After the top thread has been passed through the need-
le, the thread clamp is actuated manually to protect the
top thread from being pulled out of the needle when a ma-
chine cycle starts.
• Press key.
D.3.2 Service menu start level
Photocell correction for end of seam, seam length
and fixed seam end point:
The settings control the end of the seam. They refer to the
currently selected seam and are in close relation to the
settings made using function F2 for the beginning of the
seam.
The menu has two setting options:
• the photocell response delay for the end of the seam,
• the setting of the overall seam length.
Photocell response delay:
To set the response delay of the photocell, the correspon-
ding function "Photocell for end of seam" must be enab-
led (see Section D.3.9). The higher the input value, the
later the sewing process stops.
Seam length:
If the function "Photocell for end of seam" is disabled, the
end of the seam is controlled by a fixed seam length. For
this purpose, the function "Sewing to fixed seam end po-
sition" must be enabled (see Section D.3.10). The setting
therefore refers to the seam length to be fixed. The hig-
her the input value, the longer the seam.
• Press key.
The cursor automatically marks the variable value.
To change this value gradually:
• Press . or Y key.
Enter a completely new numeric value:
• Enter numbers using numeric keypad.
Confirm input and exit menu:
• Press W key.
NOTE - Checking settings!
The settings must be checked using a sewing piece;
if required, they must be corrected.
… 81 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beisler 2211-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beisler 2211-5 in the language / languages: English as an attachment in your email.

The manual is 8,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beisler 2211-5

Beisler 2211-5 User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info