634034
73
Zoom out
Zoom in
Previous page
1/103
Next page
- D 73 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
Sewing program
A sewing program controls the entire machine operation
during production:
transport of the sewing piece to the sewing head,
tucking of a seam and
ejection of the sewing piece.
A sewing program is determined by two different kinds of
values:
global parameters,
special parameters.
Sewing programs can be copied or renamed.
Seam number
Each sewing program can be executed with up to six
seams of different stitch widths. The seams are assigned
to the sewing program by seam numbers (01, 02, 03, 04,
05, 06).
The numeric string of the two-digit seam number is fre-
ely selectable.
Combination sewing program with seam
A sewing prgram can be combined with one seam, with
several seams or with all six seams.
If a sewing program with several seam numbers is reque-
sted, the seams are effected in the sequence of the seam
numbers from left to right.
The sequence of the seam number is freely selectable.
Memory
Sewing programs are stored in the memory (M).
The program control memory can contain up to 50 sewing
programs (M 01 - M 50) with up to six seams (01, 02, 03,
04, 05, 06) each.
All sewing programs stored in the memory can be copied
to the memory stick (backup copies).
Creating sewing programs
Basically, it is possible to create entirely new sewing pro-
grams; however, it is easier to:
copy a factory-programmed sewing program to an un-
used location in the memory and to modify this pro-
gram,
copy an already modified sewing program to an unu-
sed location in the memory and to adapt it further in
accordance with the intended purpose.
D.2
Fundamentals of programming
D.2.1 Program control layout
The program control is controlled using four different kinds
of menus:
1. System menu,
2. Service menu,
3. Global parameter menu,
4. Special parameter menu.
System menu
The system menu is used to perform all settings for the
program control operating system and for managing the
sewing programs:
Copying factory settings to the program control unit,
Saving programmed sewing programs to the memo-
ry stick,
Copying and renaming sewing programs,
Copying sewing programs from the memory stick to the
program control unit.
Service menu
The service menu is used to directly request service func-
tions. These functions support machine set-up or other
works required during machine operation, e.g. resetting
the day counter or winding the bottom thread.
Global parameter menu
This menu is used exclusively for setting the global pa-
rameters, i.e. parameters that control the basic functions
of the machine. Changing global parameters will result in
changes of seams of all stored sewing programs (e.g. time
for blowing off a finished sewing piece using compressed
air).
Special parameter menu
Special parameters are settings that refer only to one par-
ticular seam of a sewing program. Changing a special pa-
rameter will affect only the currently selected seam for
which a setting is made (e.g. stitch length of a seam).
The special parameter menu consists of several subme-
nus.
Special parameters can be functions that are enabled or
disabled as required or parameter values that are set in
lists.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beisler 2211-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beisler 2211-5 in the language / languages: English as an attachment in your email.

The manual is 8,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beisler 2211-5

Beisler 2211-5 User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info