634034
67
Zoom out
Zoom in
Previous page
1/103
Next page
- C 67 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
C.6
Troubleshooting
Error 32:
„Thread position does not
come
During thread cutting, sewing motor did not
reach cutting position
Input slower cutting speed and earlier
cutting position; replace sewing motor or
synchronizer
Error 33:
„Sewing motor does not
stop“
After thread cutting, sewing motor does not
stop within error period
Input slower cutting speed and earlier
cutting position; replace sewing motor or
synchronizer
Error 34:
„Needle not up“
Needle not in upper rest position; when the
error message is issued, the control unit
attempts once more to move the needle to
the upper position
Check sewing motor and synchronizer;
check connection between 9020013 and
sewing motor; read condition of two upper
LEDs at 9020013: if no LED illuminates
when handwheel is rotated, check sewing
motor power supply; replace sewing motor
if required; if LEDs are OK, check
connection between 9020020 and sewing
motor; replace 9020020 if required
Error 35:
„Thread breakage“
Thread monitor detects thread breakage
Error 37:
„Thread only rest
The photocell at the spool case is
illuminated, spool empty
If spool is not empty, the photocell is
maladjusted (response too sensible); adjust
correctly
Error 41:
„No parts
Photocell FZ21 remains illuminated during
insertion
Adjust photocell sensibility; input test 21
Error 42:
„Photocell not lighted“
Photocell FZ21 does not detect end of
seam
Sewing distance too long; adjust photocell
sensibility; input test 21
Error 43:
„Photocell lighted too early
Photocell FZ21 detects intermittent
reflection during insertion
Adjust photocell sensibility; input test 21
Error 45 ... 48:
“I/O DAC, ULN, 485, RES
Internal hardware error during data
transmission to adapter board 9020020
Replace 9020020
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beisler 2211-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beisler 2211-5 in the language / languages: English as an attachment in your email.

The manual is 8,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beisler 2211-5

Beisler 2211-5 User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info