634034
61
Zoom out
Zoom in
Previous page
1/103
Next page
- C 61 -
Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment
C.5
Maintenance
C.5.5 Machine set-up
Photocell light sensitivity setting:
The photocell
1
at the sewing head controls the begin-
ning and the end of the sewing process, provided that this
function has been enabled as described in Section D.4.9.
The sensitivity of the photocell must be set in accordan-
ce with the sewing material used.
1. Fig. 24: Make sure that the light beam
2
of the pho-
tocell is not interrupted.
2. Unlock the keypad:
Keep the two buttons
5
and
6
(+ / -) depressed for
approx 5 seconds.
The green LED
8
illuminates momentarily to indicate
the unlocked state. The keypad remains unlocked for
4 minutes (red LED
7
flashes), then the light guide
controller is locked automatically.
3. Set sensitivity using buttons
5
and
6
:
Press + to increase sensitivity.
Press - to reduce sensitivity.
4. Interrupt light beam
2
with the sewing material to be
used
3
; if the yellow LED
9
fails to go off, reduce
sensitivity.
NOTE - Red LED!
The red LED
77
77
7
must not illuminate in any switching
state. If the red LED illuminates, the light amplifier is
in a critical switching state. In this case, increase the
photocell sensitivity until the red LED goes off, then
set the sensitivity in accordance with the sewing
material used as described above.
Fig. 24
Fig. 24
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beisler 2211-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beisler 2211-5 in the language / languages: English as an attachment in your email.

The manual is 8,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beisler 2211-5

Beisler 2211-5 User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info