634034
34
Zoom out
Zoom in
Previous page
1/103
Next page
Short Seam Automat 2211-5 Working Instructions
- B 34 -
Beisler Automated Sewing Equipment
Controlling machine cycle in Mode 05:
1. Line up left slash selvage.
2. Depress left footswitch for slash selvage clamp:
The slash selvage clamp closes.
3. Depress footswitch for machine operation:
The folder moves right to the pick-up plate.
The cutter "Slash selvage" cuts.
The slash selvage is crimped over and picked up.
4. Depress footswitch for machine operation and keep
depressed:
• The cutter "Left trousers component" opens, vacu-
um is activated.
Line up and smooth out left trousers component.
5. Release footswitch:
The cutter "Left trousers component" cuts.
The folder puts the slash selvage down onto the
left trousers component.
6. Depress footswitch for machine operation:
• The main clamp moves to the insertion station and
picks up the sewing pieces.
7. Depress footswitch for machine operation:
Further machine cycle is fully automatic:
The folder moves right.
The main clamp transports the sewing pieces to
the sewing head.
The sewing pieces are tucked and blown off from
the working plate with compressed air.
The main clamp returns to its start position.
The next machine cycle starts.
NOTE - Supplying sewing pieces!
If the fully automatic machine cycle was started, the next
sewing pieces can be lined up.
The footswitch for machine operation remains deactiva-
ted until the main clamp reaches its start position; after that,
the next machine cycle can be started.
B.3
Operation
B.3.11 Start mode 04 / 05
Start mode for:
"Left slash selvage"
"Left and right side pocket"
"Right slash selvage for ladies' trousers"
The machine cycle "Crimping over left slash selvage and
sewing to left trousers component" can be performed in
two different modes (Mode 04, Mode 05).
Controlling machine cycle in Mode 04:
1. Line up left slash selvage.
2. Depress left footswitch for slash selvage clamp:
The slash selvage clamp closes.
3. Depress footswitch for machine operation:
The folder moves right to the pick-up plate.
The cutter "Slash selvage" cuts.
The slash selvage is crimped over and picked up.
4. Depress footswitch for machine operation and keep
depressed:
The rear cutter "Left trousers component" opens,
vacuum is activated.
Line up and smooth out left trousers component.
5. Release footswitch:
Further machine cycle is fully automatic:
The cutter "Left trousers component" cuts.
The folder puts the slash selvage down onto the
left trousers component.
The main clamp picks up the sewing piece.
The main clamp transports the sewing pieces to
the sewing head.
The sewing pieces are tucked and blown off from
the working plate with compressed air.
The main clamp returns to its start position.
6. The next machine cycle starts.
NOTE - Supplying sewing pieces!
If the fully automatic machine cycle was started, the next
sewing pieces can be lined up.
The footswitch for machine operation remains deactiva-
ted until the main clamp reaches its start position; after that,
the next machine cycle can be started.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beisler 2211-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beisler 2211-5 in the language / languages: English as an attachment in your email.

The manual is 8,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beisler 2211-5

Beisler 2211-5 User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info