660518
11
Zoom out
Zoom in
Previous page
1/22
Next page
11 XENYX XL3200/XL2400/XL1600 User Manual
LOW MID
A second semi-parametric peak lter processes the upper mid range. TheFREQ
control selects the frequency which is boosted or cut by using the HIGHMIDcontrol.
LOW
The low-frequency range is processed with a shelving lter below 80 Hz.
EQ
The EQ push-button switch activates the equalizer. Toggle the EQ to give you a
quick comparison between unprocessed and processed signal.
5.1.1 FX, MON, AUX send paths
The send paths FX, MON and AUX allow you to tap the signals of one or more
channels and route them to other outputs. This way you can create individual mixes
for eects (FX) and musicians performing on stage (MON). Using the FX/MON/AUX
send outputs, the mix is fed to the stage loudspeakers and eectsunits.
FX 1 and FX 2
The FX buses are used as send paths to external eects units. The signal is usually
tapped after the channel fader and therefore is aected by the position of the
channel fader.
The FX control adjusts the volume level of the channel signal to the eects unit.
PRE
Press the PRE switch to change the routing of both eects paths from
post-fader to “pre-fader.” This way the volume level of the eects signal is not
aected by the channel fader.
Both the FX control on the channel and the corresponding Master FX SEND control
need to be fully turned up as well. Connect the FX Send output to the input of the
eects unit. The eects signal is routed back through the FX Returns found in the
master section.
Monitor 1 and 2:
The monitor buses are used as send paths to stage monitors. The monitor sends
are hardwired pre-fader. This means the volume level of the monitor mix is not
aected when using the channel fader.
The MON control adjusts the volume level of the channel signal in the
monitorbuses.
AUX
The aux buses are used as additional, exible send paths for various applications.
The AUX control adjusts the volume level of the channel signal in the aux buses.
The sum of all aux signals is determined by the corresponding AUX SEND control
found in the main section. The signals can be routed from the corresponding
AUXSEND outputs. Both the aux send paths can be amplied up to +15 dB and
are pre-fader and post-fader switchable in the main section.
Pre-fader or post-fader:
For most applications using external eects signals, the aux send path should be
switched to post-fader so that the eects volume level in a channel is aected by
the position of the channel fader. If not, the eects signal would be audible even
with a pulled down fader. For monitoring applications, the aux send paths are
usually switched to pre-fader and therefore are not aected by the channel fader.
To oer you the utmost exibility, the FX buses can be switched to pre-fader in
each channel. What's more, you may switch the AUX buses in the main section
between pre-fader and post-fader. This gives you a maximum of 6 pre-fader
buses or, alternatively, 4 post-fader plus 2 pre-fader buses.
5.1.2 Channel fader, pan control, mute control, etc.
PAN
The PAN control determines the position of the channel signal in the stereo mix
as well as the subgroup to which the channel signal is routed.
MUTE
The MUTE switch mutes the channel. This means that the channel signal has been
removed from the main mix and subgroups. At the same time the FX, monitor
and aux paths of the respective channel are muted as well. The corresponding
MUTE LED indicates that the channel has been muted.
SOLO
Use the solo function to listen in on a channel. Press the channel's SOLO switch to
hear the signal on your headphones. Simultaneously, the monitor meter ½ switches
to the solo signal, allowing you to level the signal correctly (see chapter X). The signal
to be listened in on is tapped either before (PFL, mono) or behind (AFL,stereo) the
channel fader and the pan control (depending on the state of the PFL/AFL switch.
Thecorresponding LED lights up when the solo function isactivated.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer Xenyx XL3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer Xenyx XL3200 in the language / languages: English as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer Xenyx XL3200

Behringer Xenyx XL3200 Quick start guide - English, German - 18 pages

Behringer Xenyx XL3200 User Manual - German - 21 pages

Behringer Xenyx XL3200 User Manual - Dutch - 21 pages

Behringer Xenyx XL3200 Quick start guide - French, Portuguese, Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info