660518
7
Zoom out
Zoom in
Previous page
1/22
Next page
7 XENYX XL3200/XL2400/XL1600 User Manual
3. Installation
3.1 Audio connectors
The ¼" inputs and outputs of the BEHRINGER XENYX mixer are unbalanced
mono TS connectors except for the balanced Line inputs on the mono and stereo
channels as well as the Main Out connectors. Of course, you can use the mixer
with balanced as well as unbalanced ¼" connectors. The CD/TAPE inputs and
outputs are stereo RCA connectors.
Make sure that only competent people install your mixer. They must
be sufficiently grounded during and after the installation process.
Otherwise, electrostatic discharges may negatively affect the
operating characteristics of your equipment.
output
For unbalanced use, pin 1 and pin 3
have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
input
12
3
1
2
3
Balanced use with XLR connectors
Fig. 3.1: XLR connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
tip
hot (+ve)
Fig. 3.2: ¼" TRS connector
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
Unbalanced ¼" TS connector
tip
(signal)
Fig. 3.3: ¼" TS connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
Connect the insert send with the input and the
insert return with the output of the eects device.
Insert send return ¼" TRS connector
ring
return (in)
tip
send (out)
Fig. 3.4: Insert send/return stereo plug
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
¼" TRS headphones connector
ring
right signal
tip
left signal
Fig. 3.5: ¼" headphones connector
shield
sleevesleeve
tip tip
Fig. 3.6: RCA cable
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer Xenyx XL3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer Xenyx XL3200 in the language / languages: English as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer Xenyx XL3200

Behringer Xenyx XL3200 Quick start guide - English, German - 18 pages

Behringer Xenyx XL3200 User Manual - German - 21 pages

Behringer Xenyx XL3200 User Manual - Dutch - 21 pages

Behringer Xenyx XL3200 Quick start guide - French, Portuguese, Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info