660520

Behringer Xenyx XL1600 Manual

16
Zoom out
Zoom in
Previous page
1/22
Next page
16 XENYX XL3200/XL2400/XL1600 User Manual
MON
Use the MON controls to add an eect signal to the monitor buses 1 and 2.
Forthis application, the eects unit needs a signal: turn up the respective master
FXSEND control and the FX send controls on the channel strips (34) and pull up
the channel faders.
1-2, 3-4
These selector switches route the eect signal to the main mix or to the subgroups
1-2 or 3-4. For example, if you create a subgroup for a choir, you need to feed the
eect, which processes the vocal signal, to the same subgroup so that all signals
can be adjusted equally. In this case it doesn't matter that the FX sends are routed
post-fader as long as the choir's volume level is adjusted with the subgroup fader.
Otherwise, the eect signal is perceived as unaected in the main mix.
MUTE
The MUTE switch mutes the eect return path. Use this function to deactivate
the reverb eect of a vocalist who makes announcements between songs.
Thecorresponding MUTE LED indicates that the channel is muted.
SOLO
Press the SOLO switch to listen in on the eect signal on the
headphones/speakers as well as see it on the monitor meter ½.
Thecorresponding LED lights up when the solo function is activated.
FX RETURN
The FX return fader adjusts the volume level of the returned eect signal in the
main mix and subgroups (this depends on the routing switch you have pressed).
5.8 Monitor send section
The monitor send section merges the monitor signals of all channels. Thenthe
mix is sent to the monitor outputs. The monitor fader provides precise
adjustment and optical control of the monitor outputsignals.
SEND
The SEND faders control the output level of the monitor buses. Each fader is
60mm long and features 10 dB headroom.
MUTE
Each monitor send has a MUTE switch and MUTE LED.
SOLO
For acoustic control of the stage sound, use the SOLO switch to feed the monitor
signal to the headphone and speaker output. If you connect the speaker output to
a monitor that is identical with the monitor speakers on stage, you can tell how
the stage sound is perceived.
5.9 AUX master section
This section is split up in an aux send section (left side) and an aux return
section(right side). The aux send paths 1 and 2 can individually be switched from
pre-fader to post-fader depending on whether you want to use them as monitor
or eect signal paths. As with all outputs, both aux master outputs feature 10 dB
headroom as well as a MUTE and SOLO switch.
In the aux return section, you can adjust the signals of the devices (CD player,
eects unit, submixer, etc.) connected to the aux inputs which are then routed to
the monitor buses and the main mix.
PRE/POST
This is the global PRE/POST switch for the aux buses. For utmost exibility,
eachAUX bus can individually be switched from pre-fader to post-fader.
AUX SEND
The Master AUX SEND controls 1 and 2 adjust the signals' volume level of the
respective aux send connector. This way you adjust the sum of the AUX 1 and
AUX2 signals on the input channels.
MUTE
The MUTE switch mutes the aux outputs.
SOLO
The aux send signals can individually be listened to using the SOLO function.
MON
A signal sent from AUX RETURN can be added to the stage mix using the
MONcontrol.
AUX RETURN
The AUX RETURN controls adjust the volume level of the aux return signals in the
main mix.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer Xenyx XL1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer Xenyx XL1600 in the language / languages: English as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer Xenyx XL1600

Behringer Xenyx XL1600 Quick start guide - English, German - 18 pages

Behringer Xenyx XL1600 User Manual - German - 21 pages

Behringer Xenyx XL1600 User Manual - Dutch - 21 pages

Behringer Xenyx XL1600 Quick start guide - French, Portuguese, Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info