660524

Behringer Xenyx X2222USB Manual

10
Zoom out
Zoom in
Previous page
1/19
Next page
10 XENYX X2442USB/X2222USB/X1832USB/X1622USB User Manual
Monitor mix with eect
In this instance, your eects device should be set up as follows: the AUX SEND2
jack should be connected to the L/Mono input of your eects device, with its
outputs coming back into the STEREO AUX RETURN 1 jacks.
Connect the AUX SEND 1 jack output to the amplier of your monitor system.
TheAUX SEND 1 master control determines the overall volume of the
monitormix.
Using the STEREO AUX RETURN (TO AUX SEND) control, the eect signal can now
be blended into the monitor mix.
You can easily use the headphones distribution amplier BEHRINGER POWERPLAY
PRO HA4700/HA8000 to provide four (HA8000: eight) stereo headphone mixes for
your studio.
The following table shows which jacks on the console can be used for
thispurpose.
External eects device
receives signal from...
External eects device
routes signal back to...
The eect signal reaches the
monitor mix via…
X1622USB AUX SEND 2
STEREO AUX RETURN 1
connectors
STEREO AUX RETURN 1
(TO AUX SEND 1) control
X1832USB AUX SEND 1
STEREO AUX RETURN 2
connectors
MONITOR switch of the
FX/AUX 2 RET
X2222USB AUX SEND 2
STEREO AUX RETURN
connectors 1 or 2
STEREO AUX RETURN 1
(TO AUX SEND 1) control
X2442USB AUX SEND 2
STEREO AUX RETURN 1
connectors
STEREO AUX RETURN 1
(TO AUX SEND 1) control
optional: AUX SEND 1
STEREO AUX RETURN 2
connectors
STEREO AUX RETURN 2
(TO AUX SEND 2) control
Tab. 2.1: Connectors and controls for monitor mix with eect
STEREO AUX RETURN FX
On consoles X1622USB and X1832USB this is the STEREO AUX RETURN 2,
onconsoles X2222USB and X2442USB this is the STEREO AUX RETURN 3.
Use the STEREO AUX RETURN FX control to determine the level of the signal
routed from the AUX RETURN FX jacks to the main mix. If nothing is connected to
these jacks, the output of the built-in eects module will appear.
MAIN MIX / TO SUBS
This switch routes the signal fed in via the STEREO AUX RETURN FX jacks either to
the main mix (not pressed) or to the submix (pressed).
On the X2442USB you can select which subgroup the signal is assigned to
(switches 1-2 / 3-4, to the right of MAIN MIX / TO SUBS).
SOLO RETURNS
Additionally, this model allows you to route the aux returns together to the solo
bus and the PFL bus. The LED lights up when Solo is on.
STEREO AUX RETURN 4 (X2442USB only)
This control behaves the same way as the other stereo aux returns. Additionally,
it provides for a simple monitor path using the switch PHONES/CTRL ROOM ONLY.
PHONES/CTRL ROOM ONLY
Use this switch to route the signal appearing at the AUX RETURN 4 jacks to the
control room and headphones outputs.
2.3.6 Supplement to X1832USB
The X1832USB has a stereo fader for the AUX RETURN FX and oers a variety
of routing options: MUTE disables the eect return (but not PFL of course!),
SOLOroutes it to the Solo or PFL busses, SUB to the subgroups and MAIN to the
main mix.
X1832USB
Fig. 2.13: The FX/AUX 2 return fader of the X1832USB
MON
The MON switch routes the signals appearing at the AUX RETURN2 jacks to the
monitor path, along with the monitor signals from the channels.
If you wish to route the eect signal to the monitor mix, you can also switch aux
1 to pre-fader, drive the eect device from the aux 1 output and return the eect
signal via AUX RETURN 2 to the monitor signal.
2.3.7 XPQ Surround function (X1832USB only)
X1832USB
Fig. 2.14: Control elements of the surround function
The XPQ surround function can be enabled/disabled with the
XPQ TO MAIN switch. This is a built-in eect that widens the
stereo width, thus making the sound more lively and transparent.
Usethe SURROUND control to determine the intensity of this eect.
VOICE CANCELLER
Here, you have a lter circuitry that lets you almost entirely remove
the vocal portion of a recording. The lter is constructed in such a way
that voice frequencies are targeted without majorly aecting the rest
of the signal. Additionally, the lter seizes only the middle of the stereo image,
exactly there where the vocals are typically located.
◊ Connect the signal sources you wish to process using the Voice Canceller
to the CD/TAPE INPUT connectors. The Voice Canceller circuitry is not
available for other inputs.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer Xenyx X2222USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer Xenyx X2222USB in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer Xenyx X2222USB

Behringer Xenyx X2222USB Quick start guide - English, German, French, Portuguese, Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info