542753

Behringer Xenyx X1222USB Manual

8
Zoom out
Zoom in
Previous page
1/16
Next page
8 XENYX X1222USB User Manual
MON SEND
The aux send control MON SEND acts as master control for the monitor bus and
determines the level of the summed signal that is taken from the mixer via
the MON SEND connector and that can for example be fed to an amplier for
monitorpurposes.
Using the audio signal from this output, you can also feed a subwoofer if you
don’t require stage monitors. To this end, you should implement a crossover in
your signal path pre-subwoofer and pre-amplier, so that only low frequencies
are fed into the subwoofer. You can achieve the same eect by using the built-in
graphical equalizer. Lower all frequencies above 160 Hz and assign the equalizer
to “Monitor”.
◊ When you use the MAIN MIX fader to reduce the overall volume,
keep in mind that the subwoofer is still receiving a signal!
FX TO MON
You can use this control to insert an eects signal from the built-in eects
processor to your monitor mix. Of course, to do this, your eects processor must
rst receive a signal, i.e. the FX controls in the channel strips must be turned up,
and the FX SEND fader (see g. 2.6) hast to be open.
MON MUTE
If the MON MUTE switch is pressed, the monitor bus is muted, i.e. there is no
signal at the MON SEND connector.
FX SEND
The FX SEND fader determines the overall level of the eects bus. Both external
eects processors (via the FX SEND connector) and the built-in processor only
receive an input signal if this control is open.
FX TO MAIN
Use the FX TO MAIN control to feed the eects signal into the main mix.
If the control is turned all the way to the left, no eects signal can be heard.
FX MUTE
If the FX MUTE switch is pressed, the eects channel is muted, i.e. no signal is
present at the FX SEND connector and the eects processor no longer receives an
input signal.
2.3.2 Monitor send and FX send connector
Fig. 2.7: Aux send connectors MON and FX
MON SEND
Connect the input of your monitor power amp or an active monitor system here
to make the monitor mix audible to the musicians on the stage. The signal mix is
created using the channels’ MON controls.
FX SEND
The FX SEND connector outputs the signal you picked up from the individual
channels using the FX controls. You can connect this to the input of an external
eects device in order to process the FX bus’ master signal. Once an eects mix is
created, the processed signal can then be routed from the eects device outputs
back into the AUX RETURN connectors.
◊ If the connected effects processor receives no input signal, the FX MUTE
switch is probably pressed and/or the FX SEND control is too low.
This also goes for the built-in effects processor.
◊ Adjust your external effects processor to 100% wet (effects signal only),
because the effects signal is added to the main mix along with the
“dry” channel signals.
2.3.3 Aux return connectors
Fig. 2.8: Aux return connectors
AUX RETURN 1
The AUX RETURN 1 connectors generally serve as the return path for the eects
mix generated using the FX send. This is where you connect the output signal
of the external eects device. If only the left connector is used, the aux return 1
automatically operates in mono.
◊ You can also use these connectors as additional line inputs.
AUX RETURN 2
The AUX RETURN 2 connectors are used exactly the same way as the AUX RETURN
1 connectors. If these connectors already function as additional inputs, you
can route the eects signal back into the console via a dierent stereo channel,
with the added benet that the channel EQ can be used to adjust the frequency
response of the eects return signal.
◊ In this instance, the FX control of the channel being used as an effects
return should be turned fully counter-clockwise, otherwise feedback
problems can occur!
2.3.4 CD/tape return channel, voice canceller and
connection socket
Fig. 2.9: CD/tape return channel
This channel, intended especially for connecting stereo signal sources
(CD players, DAT recorders or even sound cards) features a particularly
practicalfeature: the VOICE CANCELLER.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer Xenyx X1222USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer Xenyx X1222USB in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer Xenyx X1222USB

Behringer Xenyx X1222USB Quick start guide - German, Dutch, Italian, Polish, Portuguese, Swedish - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info