41879
7
Zoom out
Zoom in
Previous page
1/12
Next page
7 XENYX 1202/1002/802/502 User Manual
+4/-10
The stereo inputs of the XENYX 1202 and 1002 have an input sensitivity switch
which selects between +4 dBu and -10 dBV. At -10dBV (home-recording
level), the input is more sensitive (requires less level to drive it) than at +4 dBu
(studiolevel).
2.3 Connector panel and main section
2.3.1 Send/return eects path
Fig. 2.7: FX send/return connectors
Fig. 2.8: FX send/return controls
AUX RETURN
802 only: the STEREO AUX RETURN connectors are used to bring the output of
the external eects device (whoseinput is derived from the aux sends) back into
the console. You can instead use these connectors as additional inputs, but any
eects device will then have to be brought back into the console via a normal
stereo channel. This does, however, give you the ability to use the channel EQ on
the eects return signal if you wish.
◊ When using a stereo channel as effects return path, the FX control of
the relevant channel should generally be turned fully down to avoid
undesirable feedback.
If only the left connector is used, the AUX RETURN automatically operates in
mono. Use the AUX RETURN control to determine how much of the eects signal
is sent to the main mix.
FX SEND
The FX SEND output (does not apply for 502) should be connected to the input
of an external eects unit. The post-fader FX signal you created using the
input channel FX controls is sent to the eects unit via the FX SEND ouput.
Use the FXSEND control of the main section to adjust the overall send level
(1002and1202 only).
2.3.2 Monitor and main mix
PHONES/CONTROL ROOM
The stereo PHONES jack (at the top of the connector panel) is where you connect
headphones. The unbalanced CTRL ROOM OUT jacks carry the summed eects
and main mix signals, as well as soloed channel signals. The PHONES/CONTROL
ROOM control adjusts the level of both headphones and main monitor outputs.
The 502 is not equipped with control room outputs.
Fig. 2.9: Monitor/main mix connectors
MAIN MIX
The MAIN OUT connectors are unbalanced mono jacks. The main mix signal
appears here at a level of 0 dBu. The MAIN MIX fader adjusts the volume of these
outputs. The XENYX 802 and 502 mixing consoles feature a rotary control for
thispurpose.
Fig. 2.10: Monitor control and main mix fader
2.3.3 2-Track connectors
2-TRACK INPUT
The 2-TRACK INPUTs are used to bring an external signal source (e.g. CD player,
tape deck, etc.) into the console. They can also be used as a standard stereo line
input, so the output of a second XENYX or BEHRINGER ULTRALINK PRO MX882 can
be connected.
Fig. 2.11: 2-Track input/output
Alternatively the line or tape output of a hi- amplier with source selection
switch could also be hooked up here, allowing you to easily listen to
additionalsources.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer xenyx 802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer xenyx 802 in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer xenyx 802

Behringer xenyx 802 User Manual - German - 12 pages

Behringer xenyx 802 User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info