496328
9
Zoom out
Zoom in
Previous page
1/15
Next page
9 XENYX 1202FX/1002FX User Manual
3. Applications
3.1 Recording studio
GAIN GAIN
HPS3000
TRUTH B2030A
Electric guitar
XENYX 1002FX
V-AMP 3
B-2 PRO
UMX490 MIDI sound module
CD Player
MD Recorder
Digital Audio
Workstation
Fig. 3.1: The 1002FX in a recording studio
Even though most of the tasks in a studio can nowadays be accomplished using
a computer, a mixing console remains an unavoidable piece of equipment that
lets you eectively manage audio inputs and outputs: microphone signals need
to be pre-amplied prior to being recorded, and the quality of microphone
sound is often worked on; recording and playback signals must be routed to the
appropriate connectors or integrated into the mix; the volume of headphones
and studio monitors needs to be adjusted, and so on. The extensively equipped
main section of the XENYX mixing consoles provides concrete benets to you.
Wiring:
Connect your sound sources to the microphone/line inputs of the mixing
console. Connect the master machine (DAT/minidisk recorder) to the
main outputs. Yourmonitor speakers are connected to the control room
outputs; theheadphones are connected to the headphone output.
Now,connect the CD/tape outputs to the sound card inputs on your DAW
(DigitalAudioWorkstation). Connect the outputs of the sound card in your
computer to the CD/tape inputs.
Recording and playback:
Once in the mixing console, the recording signal is pre-amplied, EQ’ed and
is then routed to the main bus. Use the LEVEL control to adjust the recording
signal level. The overall level of the signal going to the computer is adjusted
using the MAIN MIX fader. To make sure that the signal is actually being recorded,
useeither the phones bus or the control room bus to monitor not the main
mix signal (i.e. the output signal of the mixing console, before the recording);
instead, monitor the returns of the sound card that is connected to the CD/tape
inputs. To this end, press the CD/TAPE TO CTRL switch and adjust the monitoring
volume using the PHONES/CONTROL ROOM control. Doing so, you can record
additional tracks in addition to a signal already brought in (so-called overdubs).
Usethedirect monitoring function of your DAW.
◊ With this application, the CD/TAPE TO MIX switch should not be
pressed; otherwise, the playback signal from the sound card output
would be routed back to the computer and would be added to the
recording. This would not only be undesirable, it would also create a
feedback loop.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer Xenyx 1202FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer Xenyx 1202FX in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer Xenyx 1202FX

Behringer Xenyx 1202FX User Manual - German - 14 pages

Behringer Xenyx 1202FX User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info