Manual Behringer XD8USB (page 12 of 19) (English, German, French, Portuguese, Spanish)

660521

Zoom out

Zoom in

1/19

22 23XD8USB Quick Start Guide

4. To adjust the pattern volume, press VOLUME

and adjust using + or –. (You can hear your

drum playing better by turning down the

pattern volume.)

5. Press TEMPO and the current tempo will be

displayed. Press + or – to adjust.

DRUM OFF

1. Press DRUM OFF to mute/unmute the drum

track from the pattern play.

VOICE

You can change the sound (voice) of each pad, and

save your settings as a new user kit.

1. Press VOICE and the current voice number will

be displayed.

2. Press the pad button of the drum or cymbal

you want to change.

3. Press + or – to choose from 123 di erent

sounds. Press the pad to listen. Note that the

Hi-Hat has four options.

4. If required, press VOLUME and adjust the voice

volume using + or –.

5. When you like the way the pads sound,

savethis as a new user kit. Press SAVE/REC and

press + or – to choose from 11 to 15.

6. Press SAVE/REC again to save the new userkit.

CLICK

1. Press CLICK to start the metronome and display

the current signature.

2. Press + or – to change the signature.

3. Press TEMPO to display the current tempo.

4. Press + or – to adjust the tempo.

5. Press CLICK again to stop the metronome.

Recording

1. Press-and-hold SAVE/REC to enter

recordingmode.

2. If desired, press + or – to select a kit.

3. Press START/STOP and recording will begin in a

few seconds.

4. Play the drum kit, and your playing will be

recorded as pattern 41.

5. Press START/STOP again to stop therecording.

Playback

6. While Pattern 41 is displayed, press START/

STOP to play the recording.

7. To play your recording later, press PAT and

press + or – to select pattern number 41.

XD8USB

Getting started

(EN) Getting started

PLAYING

Play the kit and adjust the volume in your headphones

or external sound system to a safe listening level.

Each drum head or cymbal can give di erent sounds

depending on where it is hit:

KIT

1. Press KIT and the current kit number will

bedisplayed.

2. Press + or – to select from 10 preset kits, or 5

user kits 11 to 15. Play each kit to hear how

itsounds.

3. If required, press VOLUME and adjust the kit

volume using + or –.

4. To save this as a new kit, press SAVE/REC and

press + or – to choose from 11 to 15.

5. Press SAVE/REC again to save the new userkit.

PATTERN

There are 40 di erent patterns available for practice.

Pattern 41 is reserved for recording your own playing

while in recoding mode.

1. Press START/STOP to start the pattern.

2. Press PAT to display the current patternnumber.

3. Press + or – to select a pattern.

Crash and Ride

Kick

Hi-Hat

Snare

Toms

Head

Bow

Rim

Kick

Bow

Bow Shot with:

Pedal Open

Pedal Closed

Pedal Only: Press down for “Chick”

1. Assemble the drum kit as shown in the

assembly instructions, and tighten

allconnections.

2. Connect the cables to the drum pads,

cymbals and foot pedals, as shown in the

hook-up diagram.

3. Connect headphones or make connections to

any external sound equipment such as an

external ampli er, or active speaker. Seethe

hook-up diagram for some ideas.

4. Connect the power supply adapter to the local

mains supply. This universal adapter can accept

mains voltages from 100 VAC to 240 VAC.

Connect the DC output to the drummodule.

5. Do not turn on the drum module until all

connections have been made.

6. Turn down the VOLUME control on the drum

module, and turn on the POWERswitch.

7. If you are using external sound equipment,

turnit on after the drum module. At the end of

the session, turn any external sound equipment

o  rst.

Phones

Power

Adapter

DC IN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Behringer XD8USB in the language / languages: English, German, French, Portuguese, Spanish as an attachment in your email.

The manual is 9,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Behringer XD8USB Manual

Product: