660502

Behringer XAir - XR12 Manual

29
Zoom out
Zoom in
Previous page
1/46
Next page
29 X AIR User Manual
Preferences Tab
Select the ‘Apply changes to all channels’ option if you would like changes made
to bus send taps (pre/post-EQ, etc) to be applied to all channels.
Auto Select options allow the last soloed channel to be selected automatically,
and allow a channel to be automatically selected whenever its fader is adjusted.
Exclusive solo mode allows only one source to be soloed at a time. Pressing a
channel’s Solo button will automatically un-solo previously soloed channels.
The ‘Fine’ fader mode allows adjustments to the faders to occur more gradually,
allowing more precise control when making small changes.
The update rate defaults to 100%, meaning the meters and RTA display
immediate feedback of the audio signals. However, this can be adjusted to 50%,
which shows less detail but also conserves on processing power.
The conguration of the application’s windows can be stored and recalled upon
launch. Click the Initialize button to clear the stored window conguration.
Use the Always on Top selection to keep certain windows in view regardless of
other windows being adjusted.
7.12 Snapshot Page
The snapshot function allows specic bits of information to be saved for
immediate recall. For example, quick changes can be selected for dierent acts of
a play, performances in a music festival with several bands, or dierent
church services.
Click the ‘Snapshots’ icon on the right hand side of the main screen. A window
will open with a list of parameters to select for recall. You can select individual
channels/parameters that will be recalled from a previously saved snapshot, or
click the ‘All’ button to choose everything in a category. There may be channels,
buses, parameters, etc. that should remain unaected throughout an event, so
this method is benecial for its highly specic method of recall.
To save a snapshot, click one of the slots in the left-hand list. A new entry will
appear in the list where you can type in a name for the new snapshot. Note that
all aspects of the current arrangement will be saved to a new snapshot slot, and
the specic elements of that snapshot can be selected upon recall.
The snapshots recall parameters are listed in 3 categories: channel, parameter
and global.
The Channel Section lets you determine which channels or bus masters will be
aected during recall.
The Parameter Section lets you determine which specic preamp elements will
be recalled for the channels and buses selected in the Channel Section above.
Source aects the input vs. USB selection, Input recalls basic preamp settings
such as phantom and gain setting, and Cong recalls the conguration. EQ, Dyn,
Fdr/Pan and Mute recall these settings for the selected channels, and the bus/FX
sends can be individually assigned for recall.
Global Settings allow the input/output routing to be recalled, as well as global
conguration, DCA assignments, and FX block settings.
To delete a snapshot that is no longer necessary, select it from the list and
click Delete.
7.13 Utilities
Utilities oer convenient editing and customization of items that are not easily
controlled on other windows or menus.
RTA Utility
The RTA utility allows customization of the appearance and functionality of the
real time analyzer. The RTA Source pull-down menu allows a specic channel or
bus to be xed to the RTA, or the RTA can follow the active channel. Select Solo
Priority to send any soloed channel to the RTA.
The Decay adjustment controls how quickly the frequency bands fall after
reaching their initial indication. Peak Hold will leave a small marker to indicate
the peak measurement over a longer period of time while still monitoring the
ne audio activity. RTA Gain compensates for audio levels, ensuring accurate
readings. Select the Auto Gain feature to automatically select an appropriate
RTA gain level. The EQ overlay adjustment controls the opacity of the RTA when
viewing channel EQ curves. Select Spectrograph to view the audio energy across
the spectrum, where blue represents lower levels and red indicates higher
levels. Note that this only aects the RTA utility window and not the individual
channel EQs.
Channel and Graphic EQs can be preassigned to have spectrograph RTAs, and can
operate as pre or post-EQ. These selections can be overridden on the channel/bus
EQ tab. Select the ‘Use RTA Source’ option if you want to view a source’s RTA while
adjusting another channel's EQ.
Select a 30 or 60 dB gain range, and pre or post EQ results. Select Peak to monitor
the rapid changes in frequency response, or RMS to view an average response
over a longer period of time.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer XAir - XR12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer XAir - XR12 in the language / languages: English as an attachment in your email.

The manual is 14,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer XAir - XR12

Behringer XAir - XR12 Quick start guide - English, German, French, Portuguese, Spanish - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info