660502

Behringer XAir - XR12 Manual

20
Zoom out
Zoom in
Previous page
1/46
Next page
20 X AIR User Manual
6. X AIR for Android
The X AIR applications for iOS, Android and Mac/Win/Linux allow all of the
physical controls and features normally found on analog mixers to be adjusted
digitally, and also allow eects and routing to be fully adjusted, all from a remote
location away from the input box. This results in a very compact, yet full-featured
mixing solution that can be operated while moving about the venue or studio.
This chapter will discuss the software’s functionality on an Android device.
6.1 Main View
The Main View screen provides access to all 16 channel faders, Aux in, and FX and
bus levels, as well as navigation to preamp controls, meters, FX slots and more.
1. The Channel Strip gives quick reference to the status of various preamp
settings, and allows access to Gate, Dynamics, EQ, Pan and Input controls.
2. Touch a channel’s Solo button to send the channel to the solo bus. The corner
of the button will light yellow to indicate that a channel has been soloed.
3. Each channel has a dedicated meter to monitor the input level. If the meter
reaches the red clip lights, lower the gain control on the Input screen.
4. The Channel Fader adjusts a channel’s level, or adjusts the aux/FX/bus send
level, depending on which layer is selected on the right-hand side.
5. Touch a channel’s Mute button to mute the channel. The button will light red
when muted.
6. Access the Meters, Eect Rack, Snapshots, Show/Scene, Routing and Setup
pages by touching these buttons.
7. Engaging the Fine button causes the faders to be adjusted in smaller
increments, allowing more precise control.
8. Select a channel bank 1-8 or 9-16 with these buttons.
9. Access the Mute Group edit screen by pressing the Mutes button:
Engage the Mute Lock button to prevent accidental muting of individual channels.
Mute All and Unmute All are quick ways to fully mute or unmute all sources. Tap one
of the 4 Mute Group buttons to mute the channels assigned to that group, and hold
one of the buttons to edit which channels are assigned to the group.
10. Access the Aux and FX return faders with this button.
11. Activate the Sends on Faders function with this button. When active,
thefaders control the bus send levels for the currently active bus
(seecallout13). Moving between the channel and Aux/FX layers allows the
sends for those layers to be adjusted as well.
12. Access the bus master faders with this button. Note that these will not be
visible when the Sends on Faders function is active.
13. When using the Sends on Faders function, the bus to which the channel
signals are sent is selected with the button directly below the Sends on
Faders button. Pressing the Bus Master button will allow the send level for
the selected bus to be adjusted.
14. Access the FX Send and Main LR faders with this button.
6.2 Input
The Input section allows adjustment of the most common preamp parameters
such as gain, phase and phantom power. This is accessed from the Main View
screen by pressing just above the Solo button in the channel strip area. By
default, each channel will have a generic name such as “Ch 01” or “Bus 1”, but this
can be customized in this section.
1. Touch this top button to access the Scribble Strip page where a custom name
and color can be selected.
2. Adjust the Pan by touching this button.
3. The on/o status and basic parameters for several preamp features can be
adjusted on this page. To edit in detail, press Cong, Gate, EQ, etc.
4. Many preamp functions have factory settings that can be accessed from the
folder icon.
5. Current settings can be saved for later recall.
6. Press this button to copy the current settings.
7. Press this button to paste the recently-copied settings from one channel
toanother.
8. Skip to the previous or next channel with the arrow buttons.
(7)
(9)
(11)
(10)
(13)
(12)
(14)
(1)
(2)
(3)
(4)
(5)
(6)
(8)
(1)
(2)
(4) (5) (6) (7)(3) (8)
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer XAir - XR12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer XAir - XR12 in the language / languages: English as an attachment in your email.

The manual is 14,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer XAir - XR12

Behringer XAir - XR12 Quick start guide - English, German, French, Portuguese, Spanish - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info