Manual Behringer XAir - XR12 (page 16 of 46) (English)

660502

Zoom out

Zoom in

1/46

16 X AIR User Manual

5. X AIR for iPad

The X AIR applications for iOS, Android and Mac/Win/Linux allow all of the

physical controls and features normally found on analog mixers to be adjusted

digitally, and also allow eects and routing to be fully adjusted, all from a remote

location away from the input box. This results in a very compact, yet full-featured

mixing solution that can be operated while moving about the venue or studio.

This chapter will discuss the software's functionality on an iPad.

5.1 Main Screen

The main screen provides access to all 16 channel faders, Aux in, and FX send

levels, as well as navigation to preamp controls, meters, FX slots and more.

Thechannel strips can be swiped side to side to reveal all 21 faders, and the

selected bus fader is always visible.

1. The Channel Strip control section gives a quick reference to the status of

phantom power, aux send levels, pan, etc., but no adjustments are made

directly on this screen. Touch anywhere inside a channel’s top strip section to

edit parameters.

2. Touch a channel’s Solo button to send the channel to the solo bus.

Thebutton will light yellow to indicate that a channel has been soloed.

3. Each channel has a dedicated meter to monitor the input level. If the meter

reaches the red clip lights, lower the gain control on the Input screen (5.2).

4. The Channel Fader adjusts a channel’s level, or adjusts the aux/FX send level,

depending on which layer is selected on the right-hand side (see callout 11).

5. Touch a channel’s Mute button to mute the channel. The button will light red

when muted.

6. The Meters, Shows, Eects, Routing and Setup buttons allow direct access to

these menus.

7. The Advanced button only applies to the Gate and Dynamics sections

(5.4and 5.5).

8. The Solo Clear button releases all soloed channels.

9. The Solo Meter shows the level of the solo bus.

10. The Channel Width button toggles between normal and condensed channel

strip views. When active, the channel strips provide more detail and

additional room to touch the desired fader or button, while the condensed

view allows all 16 inputs to be viewed simultaneously. In either view,

thestrips must be swiped to the left to access the FX send levels.

11. The Fader Bank buttons alter the function of the channel faders. Whenset

to Main, the faders adjust the channel volume levels sent to the main

bus, andthe overall main output. When one of the Aux or Eect buttons

are selected, the faders adjust each channel’s send level to that bus for

monitoring or eects routing. The level for the Aux or Eect bus that is

currently selected can be adjusted where the main fader normally appears.

5.2 Input

The Input section allows adjustment of the most common preamp parameters

such as gain and phantom power. This is accessed by pressing the top of the

Channel Strip of the channel you wish to modify. If another menu such as Sends

or Gate come up instead, the menus can be swiped side-to-side without

returning to the Main Screen.

1. The Link button allows adjacent channels to be linked as a stereo pair.

Moving one of the linked channels‘ fader will also adjust the other channel.

2. The Phase button inverts the phase.

3. Use the Mic/USB switch to determine whether the channel is fed by

the microphone input or by a signal from a DAW via the multi-channel

USBconnection.

4. The Mic Gain knob adjusts the input gain for the currently selected channel’s

mic preamp.

5. The USB Trim knob adjusts the digital trim for the signal coming from the

connected computer. The Mic/USB switch must be set to USB.

6. The HPF Freq knob adjusts the frequency of the lter, allowing unwanted

low frequencies to be removed.

7. Engage the HPF (high-pass lter) with this switch.

8. Press this button to engage the phantom power.

5.3 Sends

The Sends tab allows the currently selected channel’s signal to be routed to the

6 Aux outputs and to the 4 Eects processors. Aux and Eects routing can also

adjusted using the fader banks on the right-hand side of the screen.

(7)

(8)

(9)

(10)

(11)

(1)

(2)

(3)

(4)

(5)

(6)

(1)

(2)

(6)

(3)

(8)

(4) (5)

(7)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Behringer XAir - XR12 in the language / languages: English as an attachment in your email.

The manual is 14,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer XAir - XR12

Behringer XAir - XR12 Quick start guide - English, German, French, Portuguese, Spanish - 25 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Behringer XAir - XR12 Manual

Product: