660494
8
Zoom out
Zoom in
Previous page
1/64
Next page
8 X32 RACK DIGITAL MIXER User Manual
Startup and Shutdown, and Update:
We recommend switching the X32 RACK mixer on rst, and shutting it o last
when any sound system is connected. This will prevent the possibility of any
unexpected noises being transmitted during the startup/shutdown process.
The Setup screen’s general preference page contains a Safe Main Levels function.
When activated, the console automatically mutes the main LRC levels when booting
the console. It also prevents any scene loading from aecting (i.e. turning up)
the mains levels.
Synchronization and Sample Rate settings for the console can be adjusted on the
Setup/Cong page, but please note that sample rate changes will require a
reboot of the console. When you see a red square indication at the top section of
the main display, please verify if the synchronization settings on Setup/Cong
make sense.
In order to prevent any errors by losing power during a store operation,
we recommend using the “Safe Shutdown” function from the Setup/Global page.
NOTE: The X32 RACK can be locked against unintended use by activating ‘Lock Console’
from the Setup/Global page. In this state the UI will not allow any changes to be made
and the display shows “X”. Keep HOME depressed for about 5 seconds to unlock the
X32 again.
The X32 rmware can easily be updated by performing the following steps:
• Download the new console rmware from the X32 RACK product page onto
the root level of a USB thumb drive
• Plug the USB thumb drive into the front panel USB connector while the console
is turned o
• Hold the USB button depressed while switching the console on. While booting,
the X32 RACK will run a fully automatic rmware update, which will take
2-3 minutes longer than the regular boot sequence
When no update le is available on the USB drive, or when it is corrupted,
the update mode will remain active, preventing the X32 from booting regularly.
Switch the console o and back on without holding the USB button to boot the
console with the existing rmware.
CAUTION: Please do not block the vent openings on the sides of the X32 RACK
cabinet! Specically when mounting the X32 RACK in a road case, please ensure
there is sucient space to allow for some airow.
A 48K
C X-USB
16
15
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer X32 Rack at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X32 Rack in the language / languages: English as an attachment in your email.

The manual is 6,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer X32 Rack

Behringer X32 Rack Quick start guide - English, German, French, Portuguese, Spanish - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info