660493
14
Zoom out
Zoom in
Previous page
1/74
Next page
14 X32 PRODUCER DIGITAL MIXER User Manual
2.4 Group/Bus Banks (23) DAW Remote – Press this to enable DAW remote control.
(24) Group/Bus Layers – Select between DCA groups 1-8, Buses 1-8 or 9-16,
or Matrices 1-6 and the main center bus with these buttons. The currently
active layer will light.
(25) Sends on Faders – Press this button to activate the Sends on Faders
function. See the Topic Guide for more details.
(26) Select – Press this button to select a DCA or bus (depending which layer
isactive) and allow it to be edited by the Channel Strip and Main Display.
(27) Group/Bus Meter – This displays the signal level of the DCA or bus
(depending which layer is active). The Pre LED indicates that the bus is
sourced pre-fader, while the Comp LED indicates that compression is active.
(28) Solo – Press this button to solo the DCA or bus.
(29) Mute – Press this button to mute the DCA or bus.
(30) Fader – Use this to adjust the bus level. The faders will automatically display
the current status as layers and functions are changed.
(31) Main Select – Press this button to select the main bus for editing.
(32) Clear Solo – Press this button to release all sources assigned to the solobus.
(33) Main Solo – Press this button to solo the main bus.
(34) Main Mute – Press this button to mute the main bus.
(35) Main Fader – This fader adjusts the output of the main bus.
(26)
(27)
(28)
(29)
(30)
(31)
(32)
(33)
(23)
(25)
(24)
(35)
(34)
2.5 Rear Panel Connections
(38)
(39)
(40)
(37)
(41)
(36)
(42)
(36) MON OUT - Connect a pair of studio monitors using balanced ¼" cables.
(37) Outputs 1-8 – Send audio to external equipment using XLR cables.
Outputs 7 and 8, by default, carry the main stereo bus signals.
(38) Power Switch – Turn the power on and o with this switch.
(39) X-USB card – Transmit up to 32 channels of audio to and from a
computer via USB 2.0.
(40) Remote Control – Connect to a PC for remote control via Ethernetcable.
(41) AUX IN/OUT – Connect to and from external equipment via ¼" or
RCA cables.
(42) Talkback Input – Connect a talkback mic via standard XLR cable to
this input.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer X32 Producer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X32 Producer in the language / languages: English as an attachment in your email.

The manual is 9,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer X32 Producer

Behringer X32 Producer Quick start guide - English, German, French, Portuguese, Spanish - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info