660493
11
Zoom out
Zoom in
Previous page
1/74
Next page
11 X32 PRODUCER DIGITAL MIXER User Manual
iPad App for X32 PRODUCER
Many functions of the X32 PRODUCER console can be remotely controlled by
a dedicated iPad app. Details about the app’s download, setup and operation
are included in a separate user manual available for download from the
X32 PRODUCER product page.
The app’s User Interface is optimized for the touchscreen nature of the iPad
device and provides many useful remote features of the console. Using the app,
you can perform functions such as adjusting monitor mixes from the stage
while interacting with musicians, or adjusting the front-of-house mix from the
audience, while hearing the mix exactly as the audience does.
Windows-based application and Linux/OS X application
for X32 PRODUCER
Also oered is a separate remote editor running onhost computers that will
allow for complete editing control of the X32 PRODUCER via Ethernet. Details of
the remote editor’s download, setup and operation are included in a separate
user manual available for download from the X32 PRODUCER product page.
Check out behringer.com for more information.
Tip: The X32 PRODUCER remote communication is OSC-based (open sound
control) and we will share the protocol on our website, allowing developers to
design their own control software. Stay tuned to behringer.com for details on the
OSC protocol.
X-USB card
The X-USB card allows transmission of up to 32channels to and from a connected
computer. Pleasedownload the X-USB drivers and Quick Start Guide from
behringer.com before connecting the mixer to your computer.
Startup and Shutdown, and Update:
We recommend switching the X32 PRODUCER mixer on rst, andshutting it o
last when any sound system is connected. This will prevent the possibility of any
unexpected noises being transmitted during the startup/shutdown process.
The Setup screen’s general preference page contains a Safe Main Levels
function. When activated, theconsole automatically mutes the main LRC levels
when booting the console. It also prevents any scene loading from aecting
(i.e. turning up) themainslevels.
Synchronization and Sample Rate settings for the console can be adjusted on
the Setup/Cong page, but please note that sample rate changes will require a
reboot of the console. When you see a red square indication at the top section of
the main display, please verify if the synchronization settings on Setup/Cong
make sense (see section 3).
If the console has been used by someone else, andyou feel unsure about its
specic routing status, you can reset the X32 PRODUCER to default settings in two
convenient ways:
• While the console is booting and the “X32” logoappears on the screen,
press and hold the Scenes/Undo button until the console is fully operational
and the Home screen is displayed. Theconsole will now be in the same state
as it was when shipped from the factory. However, youcan immediately
revert to the status the console was in when being switched o the last time
by pressing the Scenes/Undo button
• You can also reset the console any time after booting by pressing
Setup/Cong, then Initialize
NOTE: Initializing the console does not automatically erase the current show data
or any stored scenes. Ifyou wish to clear all scenes, please use the ‘Initialize All
Show Data’ option on Setup/Congpage.
In order to prevent any errors by losing power during a store operation,
we recommend using the “SafeShutdown” function from the Setup/Globalpage.
NOTE: The X32 PRODUCER can be locked against unintended use by activating
’Lock Console’ from the Setup/Global page. In this state the UI will not allow any
changes to be made and the display shows “X”. Keep HOME depressed for about
5s to unlock the X32 again.
The X32 rmware can easily be updated by performing the following steps:
• Download the new console rmware from the X32 PRODUCERproduct page
onto the root level of a USB thumb drive
• Plug the USB thumb drive into the top panel USB connector while the
console is turned o
• Hold the USB View button depressed while switching the console on.
While booting, theX32 PRODUCER willrun a fully automatic rmware
update, whichwill take 2-3 minutes longer than the regular boot sequence
When no update le is available on the USB drive, orwhen it is corrupted,
the update mode will remain active, preventing the X32 from booting regularly.
Switch the console o and back on without holding the USB View button to boot
the console with the existing rmware.
CAUTION: Please do not block the vent openings of the X32 PRODUCER cabinet!
Specically when mounting the X32 PRODUCER in a road case, please ensure
there is sucient space to allow for some airow.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer X32 Producer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X32 Producer in the language / languages: English as an attachment in your email.

The manual is 9,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer X32 Producer

Behringer X32 Producer Quick start guide - English, German, French, Portuguese, Spanish - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info