660492
9
Zoom out
Zoom in
Previous page
1/21
Next page
16 17X32 CORE DIGITAL RACK MIXER Quick Start Guide
X32 CORE DIGITAL RACK MIXER Select Knob Functions
(EN) Step 3: Select Knob
Functions
The SELECT knob serves several functions on the X32 CORE. The following table describes the SELECT knob
behavior in each of the available scenarios.
Action
Functional Description
Channel Select Mode (SCENE/SETUP button LED is o)
Display >Selected channel number
>Input source
>Channel icon and color
>Nickname
Short press Toggles the selected channel to SOLO on/o
> Channel signal will be sent to Monitoring L/R outputs on rear panel and Phones
output on front panel
> Exact behavior depends on settings in Monitoring page (remote controlled via
editing software)
Rotate Immediately selects the desired channel
(input, aux in, FX return, bus, matrix, main or DCA)
>The Channel Type LEDs [5] will follow the selection.
> Note that the X32 CORE Channel Selector will skip all channels, setting the
display color to ’black’ or ’o.
Long press Clears all active channel solos
Scene Select Mode (accessed by pressing the SCENE/SETUP button so that the LED is green)
Display >“Scene” in bold
>Current scene number
>Next scene number and name (small) to be loaded on GO
Short press Recalls the selected Scene from X32 internal memory “GO
> behavior depends on Scene settings/preferences (remote controlled via
editing software)
> Scene safes can only be set/reset remotely
> Scenes/Shows from USB drives can only be accessed remotely
>A complete show can be loaded from an attached USB drive into the internal
memory using Setup Mode
Rotate Preselects the next Scene
Setup Mode (accessed by pressing and holding the SCENE/SETUP button so that the LED is green)
Rotate and press Select and enter the Setup pages:
1. Load Show
2. Contrast
3. LEDs
4. Clock Rate
5. Sync
6. IP Address
7. IP (Subnet) Mask
8. IP Gateway
9. Lock
1. Load Show Load show from root directory of attached USB drive
>display 3 rows:
-Load Show
-Exit
-Show Files
>Exit leads back to Setup Mode root level
>Turn clockwise to scroll through a list of show les found in USB root directory,
push to load selected show and return to Setup Mode root level
2. Contrast LCD contrast
> Rotate to adjust 0-100
> Press to conrm and exit
Action
Functional Description
3. LEDs LED brightness
> Rotate to adjust 0-100
> Press to conrm and exit
4. Clock Rate Select the internal Sample Clock Rate
> Rotate to adjust 44.1 or 48 kHz (change requires to reboot the X32 CORE)
> Press to conrm and exit
5. Sync Choose Clock Synchronization source
> Rotate to select INT (internal), AES50 (Port) A, or AES50 (Port) B
> Press to conrm and exit
6. IP Address Select the IP Address for X32 CORE
> Rotate to adjust the rst triplet (0-255)
> Press to conrm
> Rotate to adjust the second triplet (0-255)
> Press to conrm
> Rotate to adjust the third triplet (0-255)
> Press to conrm
> Rotate to adjust the fourth triplet (0-255)
> Press to conrm and exit
7. IP Mask Select the IP Subnet Mask for X32 CORE
> Rotate to adjust the rst triplet (0-255)
> Press to conrm
> Rotate to adjust the second triplet (0-255)
> Press to conrm
> Rotate to adjust the third triplet (0-255)
> Press to conrm
> Rotate to adjust the fourth triplet (0-255)
> Press to conrm and exit
8. IP Gateway Select the IP Gateway for X32 CORE
> Rotate to adjust the rst triplet (0-255)
> Press to conrm
> Rotate to adjust the second triplet (0-255)
> Press to conrm
> Rotate to adjust the third triplet (0-255)
> Press to conrm
> Rotate to adjust the fourth triplet (0-255)
> Press to conrm and exit
9. Lock Locks the X32 CORE
>Display “Lock Cancel”
>Press to cancel locking
> Rotating clockwise turns the display from Green to Red backlight and
shows “LOCKED”
> Press and hold the SCENE/SETUP button for 5 seconds in order to exit Locked
mode and get back to the standard Channel Select mode (showing the last
selected channel)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer X32 CORE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X32 CORE in the language / languages: English, German, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer X32 CORE

Behringer X32 CORE User Manual - English - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info