660526
11
Zoom out
Zoom in
Previous page
1/26
Next page
1. X-USB Interface Operation Guide
1.1 Host system requirements for X-USB
interface expansion card
Check the BEHRINGER website at behringer.com for updates
of X-USB rmware or system requirements. Please nd the
recommended hardware/software minimum congurations in the
specications section.
1.2 The BEHRINGER X-USB
High-Performance 32-Channel
24-Bit USB Audio Interface
The X-USB option card gives 32 channel, bi-directional audio
I/O via USB 2.0 serial bus for Mac computers or Windows-
based applications. The simultaneous 32-in, 32-out audio
channels enable for extremely powerful studio and live
applications. You can run virtual live sound checks or 32-track
high-quality studio recordings, whileat the same time remote
operating your DAW via HUI/Mackie Control emulation. The high
speed 24-bit signal transmission and ultra-low latency ASIO
drivers and CoreAudio compatibility even allow inserting audio
plugins on your PC to perform advanced outboard processing.
1.3 Conguring the X-USB option card for
use in the console
The console will automatically detect the X-USB option card
during the regular boot cycle, and it will display the cards
presence in several instances.
The green square in front of “C: X-USB” indicates that the card is
installed and working properly.
2. Installing a BEHRINGER
InterfaceCard
Before you install an I/O card to the expansion slot of the console,
you must check the BEHRINGER website to verify whether the
console supports that card. behringer.com
CAUTION: Before installing optional I/O cards into the console,
you must make sure that the consoles power switch is turned o.
Malfunctions or electrical shock may occur otherwise.
To install an interface I/O card:
1. Make sure that the mixer’s power is turned o.
2. Loosen the screws that fasten the slot, then remove the slot
cover and keep it in a safe place.
3. Before removing the X-USB card from its protective bag,
it is recommended to touch the grounded metal chassis of
the console to prevent electrostatic discharges aecting the
sensitive electronic components. It is generally a good idea
to hold the card either by the face plate or by the two small
handles, but never touching the components on the circuit
board directly.
4. Align both edges of the card with the guide rails inside the
slot and carefully insert the card into the slot. Push the card
all the way into the slot to ensure that the contacts of the
card are correctly inserted into the connector inside.
5. Fasten the card using the included screws. Be aware that
damage or malfunctions may occur if the card is
not fastened.
11Quick Start Guide
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer X-USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X-USB in the language / languages: English, German, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info