660552

Behringer X-TOUCH MINI Manual

5
Zoom out
Zoom in
Previous page
1/11
Next page
(EN) Step 1: Hook-Up
X-TOUCH MINI Hook-up X-TOUCH MINI Controls
8 X-TOUCH MINI 9 Quick Start Guide
(1) Push encoder knobs - there are 8 endless encoders,
eachwith a detent and push function (not illuminated),
anda 13-segment amber LED ring. These knobs are typically
used in Digital Audio Workstation (DAW) applications for
ne control of parameters such as Pan control of Ch. 1 to 8,
or individual level adjustments.
(2) Select buttons - there are 2 x 8 soft touch buttons with
amber backlit LEDs. These are typically used for DAW mixer
applications (e.g. Solo, Mute of Ch. 1 to 8), DAW transport
applications (e.g. play, rec, stop), lighting applications
(spotlight on/o ), and sample triggering (notes on/o ).
(3) MC button - this standard select button can also be used to
switch the unit between Mackie Control mode and standard
mode as follows: Press and hold it down while connecting
the unit to a live computer’s USB port. Releasethe
MC button when the MC MODE LED on the right lights
continuously. The mode is remembered after power-o and
unplugging from the USB port. Repeat this procedure to
change the unit back to standard mode.
(4) MC MODE LED - this amber LED lights when the unit is
operating in MC mode.
(5) Layer A and B buttons - these 2 soft touch buttons with
amber backlit LEDs, allow selection between preset A or
preset B in standard mode: Press “A” to select “Preset A,”
press “B” to select “Preset B.” In MC mode, there are
di erent assignments. See MIDI Map on page 14.
(6) Fader - this standard non-motorized 60 mm fader
is typically used for the control of level functions in
DAW applications.
(7) USB Mini-B connector - this connects to a computer’s
USBA port for bus-powering and data transfer
(send/receive). Theunit is USB powered through this
connection. (Plug directly to the computer’s USB A port,
and not to a keyboard’s USB port.)
(EN) Step 2: Controls
Laptop
USB Mini-B
USB A
(1)
(4)
(6)
(7)
(3)
(2)
(5)
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer X-TOUCH MINI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X-TOUCH MINI in the language / languages: English, German, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info