Manual Behringer X-ADAT (page 11 of 28) (English, German, French, Portuguese, Spanish)

660556

Zoom out

Zoom in

1/28

11Quick Start Guide

1. Introduction

The X-ADAT card is a multichannel audio interface expansion card

for the X32 series of digital mixers. It provides 32 channels of input

and output via 8 Toslink connectors and word clock transmission

via coaxial connector. The interface is perfect for recording with

standalone ADAT hard disk recorders and oers some unique

digital insert options for incorporating external processors with

ADAT connectivity.

2. Installation

Before you install the X-ADAT card in the expansion slot of the

X32 console, you must check behringer.com to verify whether the

console rmware supports that card.

Caution – before installing the X-ADAT card into the console,

you must make sure that the console’s power switch is turned o.

Malfunctions or electrical shock may occur otherwise.

1. Make sure that the mixer’s power is turned o.

2. Loosen the 2 screws left and right that fasten the slot,

then remove the slot cover or currently-installed card and

keep it in a safe place.

3. Before removing the X-ADAT card from its protective bag,

we recommend touching the grounded metal chassis of the

console to prevent electrostatic discharges aecting the

sensitive electronic components. It is generally a good idea

to hold the card either by the face plate or by the two small

handles, but never touching the components on the circuit

board directly.

4. Align both edges of the card with the guide rails inside the

slot and carefully insert the card into the slot. Push the card

all the way into the slot to ensure that the contacts of the

card are correctly inserted into the connector inside.

5. Fasten the card using the included screws. Be aware that

damage or malfunctions may occur if the card is

not fastened.

Requirements

X32 Series console with rmware version 2.0 or higher.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Behringer X-ADAT in the language / languages: English, German, French, Portuguese, Spanish as an attachment in your email.

The manual is 13,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Behringer X-ADAT Manual

Product: