Manual Beha-Amprobe IRC-110-EUR (page 16 of 162) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish)

707171

Zoom out

Zoom in

1/162

MAINTENANCE AND BATTERY REPLACEMENT

Do not use abrasives, isopropyl alcohol, or solvents to clean the case or lens/

window. If used and stored properly, the infrared lens on the product should

require only occasional cleaning (Figure 3.1).

When necessary, to clean the lens:

1. Use a hand-squeeze air pump to gently blow off any dust or debris from

the lens surface.

2. If the lens surface requires additional cleaning, use a clean, ﬁne-ﬁber

cloth, micro-ﬁber cloth, or cotton swab dampened with a mild, soapy

water solution. Gently wipe surface of lens to remove smudges and

debris.

3. Dry with an absorbent, clean ﬁne-ﬁber or micro-ﬁber cloth.

Note: Minor smudges and dirt should not signiﬁcantly affect the performance

of the product. However, large scratches or the removal of the protective

coating on the infrared lens can affect both image quality and the

temperature measurement accuracy.

To avoid incorrect measurements, replace the batteries when the battery

indicator is low. Use only AA alkaline batteries and follow all battery care

guidelines from the manufacturer. To remove the batteries, ﬁrst ensure the

product is in OFF position, then unscrew the battery cover. When installing

the batteries, be sure that the battery polarity is correct to prevent battery

leakage. Secure the batteries by screwing the battery cover back in place

(Figure 3.2).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beha-Amprobe IRC-110-EUR in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beha-Amprobe IRC-110-EUR Manual

Product: