Manual Beha-Amprobe AMP-310 (page 19 of 26) (English)

707179

Zoom out

Zoom in

1/26

Normal mode

for the MAINS circuit:

Connect the test lead L1/L2/L3 to the 3-phase mains circuit by using probes

and/or alligator clips. If the meter indicates a clockwise movement, the

phases connected to L1, L2 and L3 of the meter are L1, L2 and L3 (also

known as R, S and T), respectively. If the meter indicates a counter-clockwise

movement, swap any two connects between the meter and phases. Then

retest. Connecting the above mentioned L1, L2 and L3 of a motor and that

of the MAINS respectively should get a clockwise motor movement.

Using the Beeper feature on

& mode:

Press and hold the REC button while turning the rotary switch to

to enable the beeper, the display shows “Enbp”. When making rotary

measurement, if the rotary indication segments indicate a clockwise

movement, the beeper sounds a single long beep per segment cycle. If the

rotary indication segments indicate a counter clockwise movement, the

beeper sounds 3 short beeps per segment cycle.

Auto Power Off

The meter turns off if there is no button pushed, rotary function switch

operation for 32 minutes and/or no specified activities below, where

applicable:

1.) Significant measuring readings of above 8.5% of ranges

2.) Non-OL readings for Resistance, Continuity or Diode function

3.) Non-zero readings for Hz function

4.) Significant movement indication as in Phase Rotation functions

The meter will not enter auto power off mode when under normal

measurements. To turn the meter back on, press the SELECT button and

release, or turn the rotary switch off and on to restart the meter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beha-Amprobe AMP-310 in the language / languages: English as an attachment in your email.

The manual is 4,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beha-Amprobe AMP-310 Manual

Product: