707179
16
Zoom out
Zoom in
Previous page
1/26
Next page
12
Measuring Resistance, Continuity and Diode
W
Warning
• To avoid false readings that can lead to electrical shock and injury, de-
energize the circuit before taking the measurement.
• To avoid electrical shock when testing resistance/continuity/diode in a
circuit, make sure the power to the circuit is turned off and all capacitors
are discharged. Use DC voltage function to check the capacitors are
discharged.
1. Connect the black test lead to the COM terminal and the red test lead
to the Ω terminal.
2. Turn the rotary switch to
.
3. Press SELECT button for desired measurement function.
4. Connect the probes across the circuit or component to be tested.
Resistance measurement: The resistance reading appears on the display.
If the circuit is open or resistance exceeds the Meter’s range, the display
reads “OL”.
Continuity measurement: If the circuit is shorted, the Meter beeps and
shows a reading 10 Ω. (Beeper ON 10 Ω, OFF > 250 Ω) If the circuit is
open or resistance exceeds the Meter’s range, the display reads OL.
Testing diode: When testing diode, normal forward voltage drop
(forward biased) for a good silicon diode is between 0.400V to 0.900V.
A reading higher than that indicates a leaky diode (defective). A zero
reading indicates a shorted diode (defective). Display reads “OL”
indicates an open diode (defective). Reverse the test leads connections
(reverse biased) across the diode. The display reads “OL” if the diode
is good. Any other readings indicate the diode is resistive or shorted
(defective).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beha-Amprobe AMP-310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beha-Amprobe AMP-310 in the language / languages: English as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info