707179
9
Zoom out
Zoom in
Previous page
1/26
Next page
5
• Do not apply more than the rated voltage, as marked on the Meter,
between the terminals or between any terminal and earth ground.
• Remove test leads from the Meter before opening the Meter case or
battery cover.
• Never operate the Meter with the battery cover removed or the case
open.
• Never remove the battery cover or open the case of the Meter without
first removing the test leads or the jaws from a live conductor.
• Use caution when working with voltages above 30 V ac rms, 42 V ac
peak, or 60 V dc. These voltages pose a shock hazard.
• Do not attempt to measure any voltage that might exceed the
maximum range of the Meter.
• Use the proper terminals, function, and range for your measurements.
• Do not operate the Meter around explosive gas, vapor, or dust.
• When using probes, keep fingers behind the finger guards.
• When making electrical connections, connect the common test lead
before connecting the live test lead; when disconnecting, disconnect
the live test lead before disconnecting the common test lead.
• Disconnect circuit power and discharge all high-voltage capacitors
before testing resistance, continuity, or diodes.
• Use only 1.5V AAA batteries, properly installed in the Meter case, to
power the Meter.
• To avoid false readings that can lead to electrical shock and injury,
replace the battery as soon as the low battery indicator (
N) appears.
Check Meter operation on a known source before and after use.
• When servicing, use only specified replacement parts.
• Adhere to local and national safety codes. Individual protective
equipment must be used to prevent shock and arc blast injury where
hazardous live conductors are exposed.
• Do not use the Meter if the wear indicator in the jaw opening is not
visible.
• Only use the test lead provided with the Meter or UL Listed Probe
Assembly rated CAT III 600V or better.
UNPACKING AND INSPECTION
Your shipping carton should include:
1 Clamp meter
1 Test leads
1 Alligator clip set (AMP-310 and AMP-320 only)
1 Banana plug K-type thermocouple (AMP-310 and AMP-320 only)
1 1.5 V AAA batteries (installed)
1 User manual
1 Carrying case
If any of these items are damaged or missing, return the complete package
to the place of purchase for an exchange.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beha-Amprobe AMP-310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beha-Amprobe AMP-310 in the language / languages: English as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info