573653
16
Zoom out
Zoom in
Previous page
1/20
Next page
5. CAMERA INSTALLATION
Remove the burner plate behind the slot in order to identify the most appropriate location to left, right or
directly on the pilot bracket plate. In the trunk, find out how to wire the camera, allow the setting of the
camera and connect it to the son of the original vehicle as shown on previous pages.
After choosing the best camera position, drill a hole with a diameter of 6 mm.
We recommend that you protect the holder of an adhesive (adhesive type painter) to avoid damage during
drilling. A light sanding may be necessary after drilling the hole to deburr the hole contour, and to avoid
damaging the cable insulation of the camera.
Remove the bolt from the threaded shank of the camera, pass the thread of the camera (microphone
connector) through the hole. Collect this thread in the trunk, insert the bolt and screw it onto the threaded
rod. Clamping must be strong enough to ensure good sealing and holding the camera, attention once not over
tighten which could damage the stem filtée camera.
16
1
2
3
The camera is positioned above the plate without obscuring, and should be placed closest to the center of the vehicle as possible.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beeper RW050RF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beeper RW050RF in the language / languages: English, French as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info