521268

Beem Schneid-FiXX Manual

20
Zoom out
Zoom in
Previous page
1/56
Next page
20
EN Schneid-FiXX
BEEM - Elements of Lifestyle
Operating
Insert/remove attachment
(see image A)
Insert the attachment into the xture
(2) so that the feed shaft (6) is situated
above the symbol on the drive unit.
Turn the attachment anticlockwise until
the feed shaft (6) is situated above the
symbol on the drive unit.
The feed
shaft snaps in audibly.
To remove, turn the attachment an-
ticlockwise until the feed shaft (6) is
situated above the symbol on the
drive unit.
Inserting/removing the grater
(see images B and C)
Push the desired grater into the mount-
ing until it stops (7).
Turn the grater anticlockwise until it
stops. The grater does not snap in but
is pulled inwards and xed into place
during operation.
To remove, simply turn the grater anti-
clockwise.
WARNING
The slicers are very sharp!
Only grip the grater at the plastic ►
parts.
Inserting/removing the splash
guard (see image D)
Insert the splash guard (14) with the
locking elements into the notches of
the appliance.
Lock the splash guard by turning it an-
ticlockwise.
Using the appliance
Insert the attachment rst, then the
desired grater followed by the splash
guard.
Insert the plug into the mains socket.
Press the ON/OFF button to start the
appliance and x the grater.
Switch off the appliance.
Put a suitable container under the
spout.
Cut the ingredients into pieces to t into
the feed shaft.
Press the ON/OFF button to switch on
the appliance.
Remove the pusher.
Put the ingredients into the feed shaft
Insert the pusher into the feed shaft
and press it downwards lightly. This
pushes the ingredients into the grater.
NOTE
The straight surfaces of the pusher ►
point forwards, the rounded point
backwards.
After using
Press the ON/OFF button to switch off
the appliance and wait until the motor
stops moving.
Pull the plug out of the mains socket.
Clean the appliance and the accesso-
ries as described in the Cleaning and
care section.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem Schneid-FiXX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem Schneid-FiXX in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info