522416

Beem Power Station Pro4 Manual

24
Zoom out
Zoom in
Previous page
1/56
Next page
22
Power Station Pro4 EN
BEEM - Elements of Lifestyle
Steam ironing
Fill the appliance with water (see sec-
tion Filling the tank with water).
Allow the steam iron to heat up while
it is standing on the base station.
Insert the plug of the appliance into
the mains socket.
The power indicator (8) and the water
tank light (18) light up.
Press the temperature selection but-
ton (4) repeatedly until the desired
temperature level starts ashing in the
display. As soon as the appliance has
heated up to the selected tempera-
ture, the appliance emits an acoustic
signal and the temperature display
lights up contantly.
Before beginning with ironing, clean
the steam nozzles. To do this, press
the steam button (7) for 20 seconds,
release the button and then wait 30
seconds.
Repeat the process. When the ap-
pliance has subsequently heated up
(temperature display lights up cons-
tantly), it is now ready for ironing.
For steam ironing, press the steam
button (7).
NOTE
A loud pumping noise may be heard ►
at the beginning of steam ironing. If
there is sufcient water in the tank,
the noise will decrease as soon
as air has been pumped out of the
hoses etc.
The amount of steam produced de- ►
pends on the temperature level that
is set. The higher the temperature,
the more steam is produced (see
table in the section Selecting the
ironing temperature).
Upright steam ironing
NOTE
Upright steam ironing is suitable for ►
hanging textiles (coats, suits, cur-
tains) and for removing creases.
Only hang the washing to be ironed ►
where heat and humidity cannot
cause damage, NOT in front of
wallpaper, windows or mirrors for
example.
Iron upright for a maximum of two ►
minutes, otherwise hot water may
leak out of the iron.
Fill the appliance with water (see sec-
tion Filling the tank with water).
Only allow the steam iron to heat up
while it is standing on the base stati-
on.
Insert the plug of the appliance into
the mains socket. The power indicator
(8) and the water tank light (18) light
up.
Press the temperature selection but-
ton (4) repeatedly until the desired
temperature level starts ashing in the
display. As soon as the appliance has
heated up to the selected tempera-
ture, the appliance emits an acoustic
signal and temperature display lights
up constantly.
Hold the appliance upright with a gap
of 5 to 15 cm in front of the fabric to
be ironed and press the steam button
(7). Move the ironing sole up and
down in front of the fabric.
If steam is no longer discharged, wait
for a few seconds until the appliance
produces new steam.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem Power Station Pro4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem Power Station Pro4 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info