522415
19
Zoom out
Zoom in
Previous page
1/56
Next page
BEEM – Elements of Lifestyle
19/56
CAUTION – Material damage
26. Place the steam generator on a heat-resistant, sturdy, level, water-proof surface.
27. Always place the steam iron horizontally on the steam generator. The hot iron
may not come into contact with the power cable, the steam pipe or the plastic
parts of the steam generator.
28. The water tank may only be filled with water. Never fill with other liquids.
29. Never place the utensil near a gas flame, electric hotplate or other source of
heat. External heat can damage the utensil.
ATTENTION: No liability can be accepted for any damage caused by misuse.
5. Prior to initial use
Ensure that all the packaging has been removed from the utensil (protective foil,
etc.).
Do not remove the rating plate or any warnings.
CAUTION: Check that the utensil is undamaged and that no parts are missing. If
any components are damaged, the utensil should not be used. Contact qualified
service personnel.
Some parts of the utensil carry residue of assembly grease. Therefore there may be
some smell and smoke the first time the utensil is used.
A new iron may splash or spit when using tap water. This stops after using a few
times.
6. Use
The automatic switch-off function switches the utensil off after about 20 minutes
if you do not press the steam pressure button. The utensil beeps twice and all the
indicators go out. Press the
button to switch the utensil back on.
The anti-drip system prevents water from dripping from the sole of the iron when
the temperature is too low.
However, water still drips if:
o the temperature is on the lowest temperature setting and the steam is on.
The ceramic coated iron sole glides smoothly over the fabric when ironing. Please
bear the following in mind:
o Never iron over zip fasteners, rivets or buckles, these can scratch the sole.
o Wipe off the sole occasionally with a damp cloth. Do not use abrasive
cleaning agents.
o Always stand the iron on the steam generator for storing.
The electronic temperature setting ensures an accurate temperature control. The
display flashes whilst the iron is heating up. On reaching the temperature, the
selected temperature level lights continuously. Clicking noises whilst ironing are
normal. Use the table below for setting the temperature and observe the ironing
instructions on the clothing labels.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem Power Generator EVO3 Pro-C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem Power Generator EVO3 Pro-C in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info