521049

Beem MIRACLE CHEF basis KM 1700 S Manual

18
Zoom out
Zoom in
Previous page
1/52
Next page
BEEM – Elements of Lifestyle
18 / 52
• Lift the motor head (10) slightly
• Keep the release lever (1) in position .
• Tilt the motor head (10) back again, until you feel it lock into place. Let go of the
• release lever (1) during this process.
1.3. Removing the mixing bowl
• Make sure that the speed regulator (2) is set to 0 (off).
• Press the motor head (10) down lightly.
• Hold the release lever (1) at the position.
• Tilt the motor head (10) back (upwards) until it can be heard to lock in place.
• Turn the mixing bowl (3) anti-clockwise until it is released – now you can lift the bowl
off.
1.4. Fitting the transparent protective cover
• Press the motor head (10) down lightly.
• Hold the release lever (1) at the position.
• Tilt the motor head (10) back (upwards)
until it can be heard to lock in place.
• Place the protective cover (8) flat on the
motor head (10).
• Heed the recesses of the motor head (10)
and protective cover (8).
• Turn the protective cover (8) slightly anti-
clockwise until it is firmly in place.
• The flap opening should now be pointing to
the operating side of the food processor –
you can mount the protective cover (8)
turned through 180 degrees, however.
• The protective cover (8) is to prevent ingredients spattering out as well as for
general protection/safety.
• To make your work easier, there is a flap opening on the protective cover (8) which
can be used to add further ingredients during the mixing process without having to
remove the protective cover (8).
WARNING: Do not add ingredients by hand through the opened flap
during the mixing process. Keep your hands away from the flap opening
during operation. Do not push spatulas or any other kitchen aids
through the flap opening during operation. When adding ingredients
through the flap opening, switch the machine off briefly.
1.5. Attaching the balloon stainless steel whisk, kneading hook and mixing hook
• Make sure the plug has been removed from the mains. Set the speed regulator (2)
to 0 (off).
• Press the motor head (10) down lightly.
• Hold the release lever (1) at the position.
• Tilt the motor head (10) back (upwards) until it can be heard to lock in place.
• Insert the accessory part as far as it will go on the mixer shaft (note the position of
the guide groove) and turn it clockwise until it locks in place or sits firmly.
• Press the motor head (10) down lightly.
• Hold the release lever (1) at the position.
• Tilt the motor head (10) back again until you feel it lock into place. Let go of the
release lever (1) during this process.
• Caution: The protective cover (8) and mixing bowl (3) must be in place before you
use the attachments.
• The mixer shaft (4) rotates during operation. Which is why the protective cover (8)
must always be fixed correctly during mixing.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem MIRACLE CHEF basis KM 1700 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem MIRACLE CHEF basis KM 1700 S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info