600876
18
Zoom out
Zoom in
Previous page
1/100
Next page
Safety Instructions
· Before using, check that your plug
socket's voltage corresponds with
the voltage on your device's label.
· Always connect your device to a
earthed plug socket.
· If your device's power cable is
damaged, it must be replaced by
the manufacturer or customer
service or another similarly quali-
ed person to avoid any risks.
· Only use the device for its intend-
ed purpose and in a dry environ-
ment.
· Do not use the device on or in the
vicinity of hot surfaces.
· Do not use any device with a
damaged cable or plug or after it
has malfunctioned or has fallen
or been damaged in any other
way. Send the device to the next
authorised customer service to
be checked, repaired or to have
electrical or mechanical settings
adjusted.
· Place the device on a at surface
or a table; do not let it hang over
a table edge or counter edge.
· Make sure that the power cable
does not touch any hot surfaces.
· Do not touch the device's hot
surface (e.g. lter unit, hotplate,
bottom of the water container).
· Do not immerse the device or
power plug in water or other
liquids in order to protect against
electric shocks.
· Do not use the device outside or
in a hot environment.
· Do not pull the cable, wrap the
cable around the device or bend
the cable.
· Only use fresh (potable) and cold
to lukewarm drinking water.
· Be aware of steam leaving the cof-
fee lter container to avoid burns.
Only use the device in line with
the instructions.
· Do not use the device without
water in the tank.
· Hot steam or hot water can drip
out of the brewing head and the
milk foam nozzle. Therefore only
line up the milk foam nozzle with
the drop pan using the operat-
ing lever. Never hold your hands,
other body parts or objects that
are sensitive to moisture and/or
heat under the brewing head when
the device is in use.
· Never remove the portalter dur-
ing the brewing process.
· Never remove the milk foam
nozzle from the milk when steam
is still escaping. Otherwise hot
milk can spray out. Wait until the
process is over before removing
the container from the milk foam
nozzle.
· Risk of burning; prepared coffee is
hot.
· Do not clean the container with
an aggressive cleaner, steel wool,
or any other abrasive material.
· Always pull out the power plug
from the plug socket holding the
actual plug, not the cable.
· To disconnect the device, rst
switch the button to the "off" po-
sition, then remove the plug from
the plug socket.
· Never use the device if the glass
decanter (if any) is chipped. Only
use the glass decanter (if any)
provided with this device. Use it
carefully as it is fragile.
· This device can be used by chil-
dren from 8 years and by people
with reduced physical, sensory
or mental capabilities or a lack of
experience and/or knowledge if
17 | EN
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem i-Joy Cafe Ultimate 20 - D2000540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem i-Joy Cafe Ultimate 20 - D2000540 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info