521041

Beem Compact Power-MiXX Manual

22
Zoom out
Zoom in
Previous page
1/58
Next page
22
Compact Power-MiXX EN
BEEM - Elements of Lifestyle
Cutting/rasping
Put the mixing bowl (4) onto the mo-
tor unit (1) and turn it clockwise until it
stops (image A1).
Insert the disc spindle (10) onto the
drive shaft (3) (image B1).
Put the cutting/rasping disc (9) onto
the disc spindle (image B2). The de-
sired side (cutting or rasping) points
upwards.
Put the output attachment (8) with the
outlet pointing right onto the mixing
bowl, the triangle of the output attach-
ment points towards the symbol.
Lock the attachment by turning it clock-
wise towards the symbol (image B3).
NOTE
Make sure that the mixing bowl and ►
output attachment are seated prop-
erly, otherwise the appliance cannot
be operated (safety switch).
Fill the food to be rasped or cut into
the feed shaft of the output attach-
ment (8).
Put the collecting container (12) under
the output (image B4).
Insert the plug into the mains socket
and press the pushbutton (2).
Push the food with the pusher (7)
downwards until the feed shaft is
empty.
ATTENTION
Observe the maximum operating ►
time of 2 minutes.
Allow the appliance to cool down for ►
1 minute.
Relling:
Switch off the appliance.
Take out the pusher (7) and ll further
food into the feed shaft of the output
attachment (8).
Processing instructions
Do not overll the mixing bowl during ■
chopping.
Before chopping meat, remove ined- ■
ible parts such as the skin, tendons
and bones.
Cut the food into pieces with a size of ■
roughly 1.5 cm before chopping.
Peel the fruit, remove or wash the skin, ■
remove pip(s) and if necessary, cut
into small pieces before chopping.
In order to cut or rasp food, it may be ■
necessary to cut into smaller pieces so
that they t into the feed shaft.
After using
Switch off the appliance and pull the
plug out of the mains socket.
Rinse the mixing bowl and the acces-
sories used with water.
Clean the appliance and the accesso-
ries used as described in the Clean-
ing and care section (page 23).
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem Compact Power-MiXX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem Compact Power-MiXX in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 4,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info