703097

Beem Classico - 03428 Manual

36
Zoom out
Zoom in
Previous page
1/88
Next page
33 EN
5. The device starts to prepare espresso or make milk froth.
6. Only let go of the button once the quantity of milk or espresso that you want has
passed through. You will hear three beeps. This quantity is now saved under the
corresponding function.
Cappuccino and Latte Macchiato
This process must be carried out twice for latte macchiato and cappuccino: Once
fo
r the quantity of espresso and once for the quantity of milk:
1. On the fi rst operation, set the quantity of milk you want in the manner described in
the previous section. Make sure that the milk nozzle (8) is folded out and there is a
cup below the milk nozzle.
2. Start a second operation by pressing the appropriate button again. A beep sounds.
3. Wait until the quantity of milk has passed through.
4. As soon as the device starts to make espresso, press the appropriate button again
and hold it down. Another beep sounds.
5. Only let go of the button again once the quantity of espresso that you want has
passed through. You will hear three beeps.
Now both the quantity of milk and the quantity of espresso are saved under the
appr
opriate function.
Setting the Milk Froth Quantity
On the milk tank cover (6) there is a dial (5) which can be used to set whether more milk
froth or more hot milk should be added to the speciality coffee.
For more milk froth: Turn the dial to the top right.
For more hot milk: Turn the dial to the bottom left.
Reset to Factory Settings
If the amount of espresso and amount of milk are to be reset to the amounts preset in
the factory, proceed as follows:
1. Switch off the device via the button
(16).
2. Press the buttons
(24) and (17) simultaneously and keep them held down.
3. Switch the device back on via the
button. The control panel (X) fl ashes 5 times
and 5 beeps are heard.
4. Let go of the buttons
and . The amounts have now been reset to the factory
settings.
03428_DE-EN-FR-NL_A5_V3.indb 3303428_DE-EN-FR-NL_A5_V3.indb 33 12.01.2018 11:24:4412.01.2018 11:24:44
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem Classico - 03428 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem Classico - 03428 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info