703213

Beem 351202 - 05192 Manual

28
Zoom out
Zoom in
Previous page
1/84
Next page
EN 30
5. Use the H (23) and M (21) buttons to set the start time you want (see the “Handling and
Operation” chapter – “Time”).
For making coffee with coffee beans, use the
button (19) to set the coffee strength
you want.
6. To activate the preset time, press the TIMER button again. The
symbol (15) appears
on the display. The preset time is activated.
Once the preset time is reached, the device switches on automatically. The operating lamp
lights up and the
(17) symbol fl ashes on the display.
If the indicator on the display should stop fl ashing even though the setting has not yet
been completed, press the TIMER button again for around 3 seconds. The indicator on
the display fl ashes again and the settings can be resumed.
Deactivating the Preset Time
To deactivate the preset time setting, press the TIMER button (20). The symbol (15)
goes out and the programming is deactivated. However, the preset time is retained and can
be reactivated at any time until a new preset time is programmed in or the device has been
disconnected from the power supply.
Cleaning and Care
NOTICES
• Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to
clean the device. These can damage the surface.
1. Clean the permanent fi lter, the fi lter insert and the glass jug (6) after every use with mild
detergent and warm water or in the dishwasher.
2. Clean the thermal jug after every use with mild detergent and warm water. It is not suitable
for the dishwasher!
3. If necessary, wipe down the coffee bean compartment (2) and the lid (1) with a damp cloth.
4. Wipe down the housing with a damp cloth. If necessary, use a little mild detergent to
remove more intense soiling.
5. Check the mains cable regularly for any damage.
Cleaning the Grinder Shaft
1. Remove the coffee beans from the coffee bean compartment (2). (Apart from the few
beans that you cannot reach by hand.)
2. Insert the permanent fi lter into the fi lter insert.
3. Press the
button (18) to switch on the device. The grinding process will start.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem 351202 - 05192 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem 351202 - 05192 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info