703213

Beem 351202 - 05192 Manual

25
Zoom out
Zoom in
Previous page
1/84
Next page
27 EN
Setting the Grinding Fineness
Move the dial for the grinding fi neness (8) to the position you want (fi ne – medium – coarse)
(Picture A).
When you switch to another grinding strength, there will still be coffee powder with the
previous grinding strength in the grinder shaft. The grinder shaft may need to be cleaned
beforehand (see the “Cleaning and Care” chapter – “Cleaning the Grinder Shaft”).
Inserting the Filter
1. Open the fi lter compartment (5).
2. Insert the fi lter insert into the fi lter compartment.
3. Insert the permanent fi lter into the fi lter insert (Picture B).
4. Close the fi lter compartment again. It must engage.
Setting the Number of Cups
Keep pressing the button (25) until the display (7) shows the number of cups you want (12).
The selected number of cups is saved until a new number of cups is set or the device has
been disconnected from the power supply.
Setting the Coffee Strength
The coffee strength can be set when making coffee with coffee beans. To do this, keep pressing
the
button (19) until the coffee strength (13) you want is shown on the display(7).
Mild coffee
Medium coffee
Strong coffee
The selected coffee strength is saved until a new coffee strength is set or the device has
been disconnected from the power supply.
Keep-Warm Function
The device has an automatic keep-warm function. The hotplate remains switched on for ap-
prox. 40 minutes after each brewing process.
To end the keep-warm function prematurely, press the button (18).
If you are using the device with a thermal jug, switch off the keep-warm function by
pressing the button
(25) for approx. 5 seconds. The symbol goes out on the
display. The hotplate is not switched on after the brewing process. The device switches
directly to stand-by mode.
The keep-warm function can be switched on again by once more pressing the
button for approx. 5 seconds. The
symbol appears on the display.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem 351202 - 05192 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem 351202 - 05192 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info