713150
27
Zoom out
Zoom in
Previous page
1/70
Next page
23 EN
Stirring Insert
The stirring insert (8) prevents the milk from burning onto the bottom of the milk
container (6). Depending on the programme, the stirring insert is used with or without
the ring:
Programme Ring
KALT
(COLD)
Yes
WARM
No
SCHAUM
(FOAM)
Yes
HEISS
(HOT)
No
When the ring is attached to the stirring insert, make sure that the ring ts completely in
the groove of the stirring insert (
PICTURE C1 and C2)!
Preparation
NOTICES
Only connect the device to a socket with safety contacts that is properly installed and
matches the technical data of the device. The socket must also be readily accessible
after connection so that the connection to the mains can quickly be isolated.
Do not ll the milk container if it is positioned in the base station! Remove the milk
container from the base station to ll it.
Fill the milk container at least up to the MIN marking. Never use it without milk or with
less milk than this!
Never use the milk container without the lid. Hot milk could spray out during froth-
ing and heating.
When the device is rst used, production-related additives (e. g. grease) may cause a
small amount of smoke and / or an odour to be produced. This is normal and not a
device defect.
1. Remove the lid (1) from the milk container (6).
2. Place the stirring insert (8), if necessary with the ring for frothing, onto the magnetic pin on
the bottom of the milk container (see the “Preparation and Operation” chapter – “Stirring
Insert”).
3. Fill the milk container with the appropriate amount of milk depending on the programme.
When you do this, note the maximum ll levels (see the “Preparation and Operation”
chapter – “Markings in the Milk Container”).
05119_DE-EN-FR-ES-IT_A5_V3.indb 2305119_DE-EN-FR-ES-IT_A5_V3.indb 23 15.01.2019 11:22:4615.01.2019 11:22:46
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beem 05119 Florence at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beem 05119 Florence in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info