810610
16
Zoom out
Zoom in
Previous page
1/20
Next page
16 CLEANING AND CARE
CLEANING AND CARE
The Beefeater integrated burner has been constructed from
select grade stainless steel which, if not cared for, may
discolour over time� To keep your appliance looking its best
we recommend that the cooking surfaces are cleaned after
every use�
Cleaning
Always ensure the appliance is turned off before
cleaning�
This appliance contains brass and aluminium fittings�
Do not use caustic based cleaners�
Do not use steam cleaners as this may cause moisture
build up on electrical components�
Always clean the appliance immediately after any
food spoilage�
WARNING
CAUTION
Do not place cast iron trivet or grill plate in
a dishwasher
WARNING
Please ensure that your appliance is switched
off and has cooled down before following the
instructions below
Cleaning of Stainless Steel surfaces
WARNING
CAUTION
Do not use abrasive or caustic cleaners, scourers or metal
scrapers on the stainless steel surfaces as they may
permanently scratch and damage your appliance.
Wash all stainless steel components, including the
slimline lid and control knob cap with a soft dishcloth
using hot soapy water
The interior can be wiped down with a soft cloth in hot
soapy water
Ensure that all surfaces are dried with a clean
dry cloth�
WARNING
CAUTION
Take extra care (particularly when cleaning on and around
the control knob) to ensure that water and soapy residue
do not enter the control panel, where the valve is located or
into the burner.
Trivet and reversible grill plate
The trivet can be removed for cleaning� Clean by washing in
warm soapy water� Take care when replacing the trivets as
dropping them may damage the enamelled surfaces�
Burner
The burner ports should be checked for blockages and
cleared as required� The brass top of burner will become
discoloured with use, this is normal�
Maintenance
IMPORTANT
Special note on “tea staining”
Sometimes stainless steel surfaces are affected by a brown
discolouration called tea staining� This usually occurs in
areas which use high heat and can be easily removed using
specialised stainless steel cleaners� For best results, we
recommend that specialised cleaners be used regularly on
all stainless steel components�
Burners
Burners should be checked and cleaned before each use
if required, ensure no residues have been deposited and
gas ports are clear� Burner venturi should be clear of any
obstruction to ensure correct operation�
NOTE: Environmental conditions need to be taken into
account with regards to the maintenance required on your
product� In particular units installed in humid climates
or seaside locations will be more susceptible to surface
corrosion/discolouration over time� In these conditions
Beefeater strongly recommends cleaning and drying your
barbecue after every use and covering it when not in use to
minimise exposure to the elements�
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beefeater Proline Side Burner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beefeater Proline Side Burner in the language / languages: English as an attachment in your email.

The manual is 2.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info