810605

Beefeater Discovery 1000 series Manual

6
Zoom out
Zoom in
Previous page
1/24
Next page
GAS CYLINDER SAFETY INFORMATION
6
SAFETY INFORMATION
Gas cylinders must be stored outdoors, out of reach of
children and must not be stored in a building, garage or any
other enclosed area.
•
This appliance is designed to be used with a gas cylinder
not exceeding 13KG capacity.
•The Gas cylinder must be constructed and marked in
accordance with specifications for LP Gas Cylinders.
•
Ensure gas cylinder is within the expiration date, it is not
advised to use or attempt to refill a gas cylinder that is
outside of it’s expiration date.
•
The gas cylinder supply valve must be turned off when
the appliance is not in use.
•
The gas cylinder used must incorporate a safety collar to
protect the valve assembly.
•
The gas cylinder must always be kept and used in the
upright position.
FIG 1
Standard POL regulator
FIG 2
Quick connect regulator
IMPORTANT
When disconnecting and removing the gas cylinder for
the purpose of refilling, always observe the following
procedure:
•
Ensure that all gas control valves on the appliance and
the gas cylinder are turned off before disconnecting the
gas line from the cylinder.
•
Do not smoke or use a naked flame near the appliance
or gas cylinder while disconnecting the gas line between
the appliance and gas cylinder.
•Remove the gas cylinder from the enclosure before
disconnecting the gas line from the appliance.
•Tighten all connections before placing the gas cylinder
back in its enclosure.
The Gas Leak Testing Procedure should be conducted every
time the gas cylinder is refilled and reconnected to the
appliance – before using the appliance.
Regulator Connection
1.
Check that all control knobs are in the ‘Off’ position.
2.
Make sure the cylinder valve is off by turning the valve
knob all the way clockwise.
3.
Remove the protective cap from the cylinder if present.
4.
Make connection as described in figures 1 and 2.
5. Leak-test the connection with a soapy water solution.
(See Gas Leak Testing Procedure).
Hose and regulator replacement must be a genuine part
specified for this appliance and is obtainable from your
nearest BeefEater stockist.
Gas Leak Test Procedure
Use the following procedure to check for gas leaks.
Never use a naked flame to check for gas leaks.
1.
In a small container, mix up a solution of water and
detergent or soap. Mix the solution well.
2.
Make sure that the gas supply valve on the gas cylinder
is turned on.
3. Make sure that the gas control valves on the appliance
are all turned off.
4.
Using a brush or spray bottle apply the solution to the
gas line and each join in the gas line. See Fig 3.
5.
Bubbling of the solution will indicate that there is a leak
present.
6.
Re-tighten or re-seal any joints that are leaking.
7.
If a leak persists then contact your distributor or the
manufacturer for assistance.
FIG 3
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beefeater Discovery 1000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beefeater Discovery 1000 series in the language / languages: English as an attachment in your email.

The manual is 1.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info