473752

Becker 7926 Traffic Assist Manual

25
Zoom out
Zoom in
Previous page
1/92
Next page
25
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Adjusting the unit bracket
The support plate (7) can be swung in two
directions (horizontally and vertically). It
can thereby be set at virtually every angle
of vision to the driver.
Vertical movements
> Loosen the fastening screws (2) on both
sides far enough to be able to swivel the
carrier plate (7) downwards from above
without exerting excessive force.
> Use one hand to hold the foot (5) and
swing the support plate (7) up to the
centre or down into the position you
want.
> Tighten the fastening screws (2) suffi-
ciently so that the Traffic Assist is held
securely in place when the vehicle is in
motion.
Horizontal movements
> Loosen the locking screw (1) until the
support plate (7) can be swung from left
to right without too much effort.
> Use one hand to hold the foot (5)
and swing the support plate (7) to the
left, to the centre or to the right into the
position you want.
> Retighten the locking screw (1) again so
that the Traffic Assist is secure for trav-
el.
Adding the Traffic Assist
The unit holder (6) is equipped with four
guides, the carrier plate (7) has corre-
sponding retaining lugs.
> Position the unit holder with the guides
onto the carrier plate retaining lugs.
> Slide the unit holder downwards to the
stop.
The Traffic Assist has receptacles for the
unit holder on the top and bottom of the
housing.
> Insert the Traffic Assist into the unit
holder with the receptacles on the bot-
tom of the housing.
> Press the Traffic Assist into the unit
holder without employing excessive
force until the clip (8) engages in the re-
ceptacle.
Note:
Do not swing the support plate in both
directions at the same time! Before mov-
ing, always take the Traffic Assist off the
unit bracket.
Note:
To remove the Traffic Assist, press the
clip (8) on the unit holder with one finger
and remove the unit from the unit holder
using your free hand.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Becker 7926 Traffic Assist at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Becker 7926 Traffic Assist in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info