515346
54
Zoom out
Zoom in
Previous page
1/57
Next page
54
10.1 Monitoring on noise
Problem Cause and/or remedy
No activation
After power on bébétel® remains inactive for a waiting period of two
minutes so you can leave your room without triggering a call. If you
want to skip this period you can proceed as follow: Press key .9 and
you directly change to monitoring mode, where you can test response
sensitivity 6.3.
A call will be triggered depending on position of sensitivity switch. As
long as noise level is exceeded the indication LED shines
6.6.1.
10.2 Motion detector (COMBI)
Problem Cause and/or remedy
WALK-test LED is on, but
bébétel® does not call
Alarm unit is still in the inactive waiting period after being switched on
or after a call
Motion detector is temporarily deactivated
WALK-test LED has been
turned on, but is not light up
No voltage supplied to motion detector (¦ check cable, TWIN-adapter,
AC-adapter and mains)
Voltage supply has not yet lasted for two minutes (warm up time of
motion detector)
Call with three beeps without
prior movement (WALK-test
LED has been off all the time)
No voltage supplied to motion detector (¦ check cable, TWIN-adapter,
AC-adapter and mains)
Motion detector has been connected or disconnected after the alarm unit
had been switched on
Call with two or three beeps was
triggered although the motion
detector was temporarily
deactivated
Voltage supply of motion detector interrupted
Function switch has been shifted to OFF or PROG after deactivation.
11 Warranty
Dear Customer
Each bébétel
®
is manufactured and tested according to stringent quality rules. If you have any claim, Leitronic
AG will guarantee additional to warranty against your vendor, to repair device without any labour or material
costs, for 2 years after date of purchase. Warranty is only given if bébétel
®
has been handled according to the
above instructions. Warranty will not be given under the following circumstances:
If there is no invoice or receipt with date of purchase, vendor’s name and serial-No.
These documents have been changed or modified.
If serial-No on type label has been changed, cleared, removed or modified in any way.
If any repair, modification or other adaptation has been carried out by unauthorised persons or companies.
Damage due to tampering with device.
Damage due to external influence (Lightening, water, fire..).
Please contact us before returning a device on our INFO-Line +41 (0)56 648 40 40 or check our
interactive troubleshooting pages on: www.bebetel.com. Defected units are very rare!
LEITRONIC AG
Engeloostr. 16
CH-5621 Zufikon
Switzerland Tel +41 (0)56 648 40 40 www.leitronic.ch
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bebetel CLASSIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bebetel CLASSIC in the language / languages: English, German, French as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bebetel CLASSIC

Bebetel CLASSIC User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info