768765

Bebe Confort Titan Manual

46
Zoom out
Zoom in
Previous page
1/127
Next page
45
•
•
•
•
•
•
•
•
ATTENTION:
EN
For group 1 usage in ISOFIX use the tting clips for lower anchorage to the vehicle are not
sucient. It is essential to x the “TOP TETHER” to the upper anchorage point recommended
by the car manufacturer.
Fitting the Bébéconfort Titan seat with additional tethers using the vehicle’s ISOFIX additional
anchorage points.
The ISOFIX anchors have been developed to obtain a safe and easy xation of the child safety
systems inside the car. Not all cars are equipped with these anchors although they are standard
on more recent models. Consult the attached list of cars for which the car seat can be installed
correctly (you can also consult additional updates of this list on the website www.bebeconfort.
com).
In forward facing position, the seat must be placed on the car rear seat or exceptionally on the
front seat in accordance with the legislation in force in the country of use (In France: in
accordance with the conditions stipulated in decree n° 91-1321 du 27-12-1991).
When installing the car seat for group 1 with ISOFIX, it is necessary to remove the headrest in
order to put the TOP TETHER through correctly.
Warning: when installing the car seat, spaces between the base of the car seat and the vehicle
seat are possible depending on the position of the anchorage points within the vehicle.
Replace the Bébéconfort Titan when it has been subject of violent stresses in an
accident: the safety of your child can no longer be guaranteed.
The user must always check that any luggage and other objects likely to cause injury to the
occupant of the car seat in the case of impact are properly secured.
The rigid parts and the plastic sections of a child restraint device should be positioned and
installed in such a way that they cannot, when the vehicle is being used under normal
conditions, become trapped under a moving seat or in the vehicle door.
Always check that no part of the seat or the harness is trapped under a seat or in the vehicle
door.
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bebe Confort Titan at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bebe Confort Titan in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info