768766
48
Zoom out
Zoom in
Previous page
1/84
Next page
48 I Titan Plus I Bébé Confort
SAFETY
The Bébé Confort Titan Plus is intended for car
use only.
• The car seat is developed for an intensive use of
approximately 12 years.
• Do not use any load bearing contact points other
than those described in the instructions and marked in
the child restraint.
bé Confort Titan Plus in the car
• Before buying this product make sure the car seat is
compatible with the vehicle it is to be used in.
• After purchasing, install the seat in your vehicle. If
you encounter any installation problems, contact your
distributor immediately (prior to use).
• It is recommended to adjust to full recline position
before ISOFIX system installation. After correct
installation of the ISOFIX connector and top tether,
adjust to the proper recline position for your child.
• Remove the car seat headrest if it stops you from
adjusting the headrest of the car seat to the desired
height.
• Make sure to replace the headrest of the back seat of
your vehicle when you remove the car seat.
WARNING:
• Check that the child seat is properly installed. It is
important for your child’s safety that you fit the belt
correctly. The vehicle belt must be fixed along the
appropriated markings/ positioning points on the seat.
Please also read the label on the side of the car seat.
Never fit the belt in any way other than as shown.
• When the car seat is installed on the front passenger
seat, we recommend to switch o the front passenger
airbag if your child is sitting in a front-facing position
and place the passenger seat in the rearmost position.
• Use the car seat only on a front-facing seat that is
fitted with an automatic or static 3-point belt that has
been approved according to the ECE R16 standard or
similar. Do NOT use a 2-point belt.
• When installing the car seat, spaces between the
base of the car seat and the vehicle seat are possible
depending on the position of the anchorage points
within the vehicle.
ATTENTION:
• For usage in ISOFIX use the fitting clips for
lower anchorage to the vehicle are not sucient.
It is essential to fix the “TOP TETHER” to the
upper anchorage point recommended by the car
manufacturer.
• The ISOFIX anchors have been developed to obtain
a safe and easy fixation of the child safety systems
inside the car. Not all cars are equipped with these
anchors although they are standard on more recent
models.
• If in any doubt about the correct installation or use
A - Adjustable headrest
B - Shoulder belt slot
C - Shoulder pads
D - 5-point Harness
E - Inlay
F - Harness buckle
G - Harness adjuster button
H - ISOFIX release handle
I - Harness adjuster strap
J - Headrest adjustment handle
K - Top Tether
L - Storage compartment for the manual
M - ISOFIX connectors release button
N - ISOFIX connectors
O - Crotch pad
P - Recline handle
EN
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bebe Confort Titan Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bebe Confort Titan Plus in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 16,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info